MONSTER 2 1:8TH 25V ESC WATERPROOF W / 2200KV V2 MOTOR SENSORED V2
Press and move to zoom
Mouse over image to zoom

MONSTER 2 1:8TH 25V ESC WATERPROOF W / 2200KV V2 MOTOR SENSORED V2

Mamba Monster 2

Product #: 010-0108-05

(Based on 2 vote(s))
2 review(s) | Write a review
USD $264.95 /EA
List Price: USD $323.95 /EA
    • EA
  • Tell a Friend
  • Availability: This item is in stock.

Description

Brute Power and Sheer Stamina!

Castle Creations' introduction of the Mamba Monster was a break-through moment for R/C modelers wanting to experience what seemed to be unobtainable. Brute power and sheer stamina have made this our legacy “power up” for popular 1/8th scale buggies, truggies and on road vehicles and 1/10th scale monster trucks.

The Mamba Monster 2 ESC is capable of 2S LiPo to a maximum of 6S LiPo and is waterproof, which means you can run your vehicle through the morning dew, across the soggy snow or just about anywhere else you’d be interested in running a 1/8th scale RC buggy or truck.

Industry Leading Software Functions

The Mamba Monster 2 includes a coupon for a free Castle Link USB device. This allows access to the full programming suite of adjustable settings that tune and tweak your vehicle to your preferences, resulting in an incredible RC driving experience.

ESC Features: 

    Powerful Combination
    This combo includes the Mamba Monster 2 controller and the recently updated Castle 1515-2200Kv V2 sensored* motor, which features:

    • Input Voltage range: 2s-6s LiPo
    • Redesigned rotor and stator assemblies.
    • Reduced magnetic cogging, producing less residual drag brake.
    • Increased efficiency, resulting in lower temperatures and longer run times.
    • Smoother start-up, reducing cogging or stuttering when starting from a stop.
    • Rebuildable design allows replacement of front end bell/bearing assembly or rotor/shaft assembly. (see note below)
    • High-Strength Kevlar Wrap and 180C Grade Neodymium Sintered Magnets
    • Oversized NMB Bearings and High-Temperature, High-Purity Copper Windings
    • Castle 10 AWG, High-Strand-Count Silicone-Insulated Wire with 6.5mm Bullet Connectors
    • High-Performance 0.2mm Steel Lamination Stacked Stator
    • Oversized, low-resistance, gold-plated solder tabs
    • Sensor board with High Quality Temperature-Stabilized Sensors
    • T6 Aluminum CNC Machines Front/Rear End bell
    • Proudly Designed and Supported in Kansas, USA.
    • Backed by Castle Creations' 1-YEAR WARRANTY
    Note: 011-0130-00 Rotor Replacement is NOT compatible with the V2 motor. A new rotor replacement will be available in the future. Check back here for updates.

    ESC and Motor Package Includes
    :
    • Mamba Monster 2 ESC
    • 1515-2200kv V2 sensored* brushless motor
    • Coupon for free Castle Link USB adapter
    • Driver's Ed and Quick Start Guide
    • Decal sheet
    Sensored capabilities of the motor cannot be utilized with the Mamba Monster 2. If you require sensored operation you will need a sensored ESC like the Mamba Monster X. The Mamba Monster X paired with the same motor can be found here.


    Information

    Waterproof : Yes
    Telemetry Capable : No
    Data Logging : No
    Auxiliary Wire : No
    Minimum Input Voltage : 2S
    Maximum Input Voltage : 6S
    Sensored Capable : No
    Recon G6 Certified ESC : No
    ROAR Certified ESC : No
    CRYO-DRIVE : No
    B-Link Compatible : Yes

    Specifications

    Technical Specs
    Controller:
    Input Voltage Range: MIN: 2S LiPo
    MAX: 6S LiPo (25.2V)
    BEC Specifications: User selectable output between 5 and 7 volts; default 5.5 volts
    Operating Environment: Waterproof design allows for use in nearly any environment. Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.
    Brake: Proportional
    Reversible: Yes, but may be disabled for racing.
    On/Off Switch: Yes
    Cooling Fan: Yes, factory equipped (30mm), fully removable** (see Product Use Statements below)
    Size: Length: 2.09" (53mm)
    Width: 1.93" (49mm)
    Height: 1.44" (36.4mm)
    Weight (with no battery connector): 3.92 oz. (111.g)
    Connectors: 6.5mm female bullets for motor connection.
    Items Needed for Operation: Battery Connector required; Deans Ultra Plugs, Traxxas Power Connectors, E-Flite EC5, or 6.5mm Castle Connectors are recommended.
    Product Use Statements: *Although Mamba Monster 2 and Castle brushless motors are waterproof, they are not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.

    **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.
    Application Guidelines: Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 15 lbs, with batteries, ready-to-run.
    Not recommended for use in high speed 1/8th and larger applications (IE Arrma Infraction and Limitless, Traxxas XO-1)
    Recommended Motors: Combo includes Castle 1515 2200Kv V2: Max Cells: 6s Lipo or 16 NiMH
    Max. Recommended Vehicle Weight: Less than 15 lbs, with batteries, ready-to-run
    Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Link included) and freely downloadable Castle Link Windows software or the Castle Link iOS App and a B-LINK Bluetooth Device.
    Telemetry Link Capable: No
    Tech Notes:
    1. Mamba Monster setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a pack's suitability for a brushless application. Recommended battery capacity for 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell).
    2. Our experience  suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups.
    3. Applying voltages higher than 25.2V will cause irreparable damage to ESC.
    4. We recommend a high-current connector designed for high-powered electric systems, rated for 70+ amps. Invest in connector sets made for high-powered electric systems such as our CCBULLET 6.5mm, Castle 6.5mm Polarized Connectors, Traxxas® Power Connectors, FlightPower Star™ Plug, or Deans® Ultra Plugs
    Motor:
    Input Voltage Range: MIN: 2S LiPo; MAX: 6S LiPo (see Application Guidelines below)
    Kv: 2200
    Max. RPM: 60,000
    Motor Size: Length: 2.96" (75.18mm)
    Diameter: 1.57" (39.98mm)
    Shaft size: Diameter: 5mm, Length: 20mm
    Weight (w/wires): 15 oz. (452.2g); 380g without wires.
    Mounting Hole Specifications: 3mm and 4mm screw holes @ 1" (25.4mm) spacing.
    Cooling Fan:
    No, but available as optional accessory
    Connectors: 6.5mm male bullets.
    Items Needed for Operation: N/A
    Product Use Statements: N/A
    Application Guidelines: The ESC and motor are intended for up to 6S (25.2 Volt) operation. Incredible in monster trucks with up to 6S LiPo packs (4S LiPo is the sweet spot), and works great in 1/8th buggies and truggies and on road as well. (vehicle weight limit is 15 lbs or less, with batteries ready-to-run).
    Max. Recommended Vehicle Weight: 15 lbs (with batteries, ready to run)
    Tech Notes: Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC.

    Water Resistant Design: Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.
    Resources
    Monster 2 Driver's Ed Guide Monster 2 Quick Start Guide
    For support, frequently asked questions, technical documents, and more, visit our support site.

    Castle Creations, Inc. warrants this product to be free from manufacturing defects for a period of one year from date of purchase.

    This is a high power product with the potential to be very dangerous. Please read the safety information before use.
    This product may contain chemicals known to the State of California to cause cancer and or birth defects or other reproductive harm.

    U.S. Patent # 7400103, 7492122, 7579796, 7740516, 8287328, 8678875, and 8905814 B2 - Other patents pending.

    Controller designed, and circuit boards manufactured, in Olathe, Kansas USA.
    Controller assembled in Olathe, KS. USA



    More Features

    Product Features

    Power System Alerts:

    The Mamba Monster 2 is programmed to flash LED patterns to alert users to certain conditions such as over temperature or not detecting a valid signal from the receiver.

    Warranty:

    Castle Creations, Inc. warrants this product to be free from manufacturing defects for a period of one year from date of purchase.

    Programmability:

    Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Castle Link adapter included in package) and freely downloadable Castle Link Windows software, or the Castle Link App and a B-LINK Bluetooth Adapter  (A small subset of the settings available through Castle Link Windows software can be accessed via manual programming through the transmitter stick).

    Firmware Upgrade:

    Users will receive free access to all firmware updates, including added features sets using the Castle Link USB Programming Kit


    Castle Link Compatible
    With the Castle Link USB Programming Kit you can use your Windows™ PC toeasily program your controller. Castle Link includes all code for allCastle Link compatible hobby products in one convenient download. Note:Castle Link software requires a Castle Link USB Adapter and a computerthat is running Windows. Castle Link is compatible with Windows Vista,Windows 7, Windows 8 and Windows 10. Macintosh users may take advantageof software such as Parallels Desktop, VMware Fusion, or Apple's BootCamp along with Windows Vista, Windows 7, Windows 8, or Windows 10 to runthe Castle Link software, provided the Macintosh has an Intelprocessor. Macintosh installation is not supported by Castle Creations.

    Additional Castle Link benefits include:
    • Access expanded programming and parameters for Castle controllers
    • Access to all firmware updates, including added features sets released from Castle Engineering, at no charge.
    • Intuitive Demo Mode capability
    • Ability to default ESC to factory settings
    • Ability to save setup profiles for later use
    • Ability to download and view data logs (on applicable controllers)

    Additional Resources


    Optional Accessories
    011-0135-00
    B-Link Bluetooth Adapter supports iOS and Android App
    011-0119-00 Castle Link V3 USB Programming Kit
    010-0004-00 CCBEC 10A Peak 25V Max BEC
    010-0079-00
    Castle Link Quick Connect (or Quick Connect Duo)
    011-0053-00
    6.5mm Polarized Connectors-Male/Female Single Pk
    011-0068-00
    6.5mm Polarized Connectors-Male Multi-Pack
    011-0069-00
    Polarized Castle Connectors - 6.5mm Female Multi-Pack
    CC BULLET 6.5MM
    6.5mm Male/Female Connector Set (3ea)
    CC BULLET 8.0MM
    8.0mm Male/Female Connector Set (3ea)
    010-0153-00
    CC BEC 2.0 15A Max Ouput, 14S (58.8 Volts), Waterproof
    011-0148-00
    Castle Capacitor Pack, 8S MAX (35V)



    Service Parts



    Product review(s)

    Average rating:
    (Based on 2 vote(s))
    Rate this product:
    Scotty Bot From United States
    Beast
    May 1, 2024
    This combo is a total beast. I tried running it at 6s in a 1/8 nitro buggy conversion, and it was simply impossible... Running it at 3s now 80-100c and it is perfect! I'd attach a photo but cant :(
    0 of 0 people found this review helpful
    Was this review helpful to you? (0) (0)
    Shrome hargrove From United States
    Monster
    December 12, 2023
    Don't have this yet but I'm going to love it when I get it
    0 of 0 people found this review helpful
    Was this review helpful to you? (0) (0)

    Recently Viewed

    Castle 1520 Sensored Motor-1650Kv
    • USD $189.95 /EA
    • List Price USD $231.95 /EA
    Castle 10th Scale 1406 Sensored Motor - 7700Kv
    • USD $91.95 /EA
    • List Price USD $112.95 /EA
    CC BEC 2.0 Waterproof Voltage Regulator
    • USD $49.95 /EA
    • List Price USD $60.95 /EA
    Castle 1406 Sensored Motor - 2280Kv
    • USD $91.95 /EA
    • List Price USD $112.95 /EA