This is confidential until Wed, 9/23 @ 3PM. These are from the product page that will go live at the same time, this page will be deactivated at that time.
MAMBA XLX2 ESC COMES WITH:
MAMBA XLX2 ESC COMES WITH:
|
|
| Technical Specs | |
|---|---|
| Application Guidelines: | 1:5th Scale vehicles weighing up to 42 lbs. Vehicle Examples: Losi DB XL-E™, Losi Super Rock Rey™, Arrma Kraton 8s™, Arrma Outcast 8s™, Traxxas X-Maxx™. Note: Some vehicles may require aftermarket parts to allow ESC and/or motor fitment. |
| Input Voltage Range: | MIN: 3S LiPo, MAX: 8S LiPo 33.6V |
| Running Modes: | Sensored, Sensorless, Brushed and SmartSense™ when paired with a Castle 4-POLE 12-SLOT Sensored Motor. |
| Brake: | Proportional |
| Reversible: | Yes, but may be disabled for racing. |
| On/Off Switch: | Yes, waterproof |
| Cooling Fan: | Yes, factory equipped (50mm), fully removable** (See Product Use Statements) |
| Size: | Length: 3.98” (101.2mm), Width: 2.49” (63.3mm), Height: 2.2” (55.8mm) |
| Weight (with wires): | 13.1 oz (371g) |
| Motor Connectors: | 8mm female bullets |
| Items Needed for Operation: | The Mamba XLX2 requires the use of connectors designed for 150+ amps continuous, such as Castle 6.5mm polarized or CC BULLET 8.0MM |
| Operating environment: | Waterproof design for all weather conditions (See Operating Environment Considerations) |
| Programmability: | Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software, or the Castle Link App and a B-LINK Bluetooth Adapter (sold separately). |
| Telemetry Link Capable: | Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX, T7PX and T7PXR Transmitters. |
| Tech Tips: | The Mamba XLX2 has threaded mounting holes on the bottom of the ESC. There are four M3 mounting holes with a maximum depth of 5mm; they are spaced 46mm wide and 40.2mm long. Use this template for assistance in alignment and screw hole positioning. |
| Product Use Statements | |
|---|---|
| Calibration: | Individual transmitter signals for neutral, full throttle, and full brake vary. You must calibrate your Castle ESC so that it will operate effectively with your transmitter. Anytime the ESC is powered up with a new transmitter or with different throttle channel settings, it will need to be calibrated to the transmitter’s throttle settings. The ESC may also need to be calibrated after updating to new software via Castle Link. |
| Input Voltage: | Applying voltages higher than 33.6V will cause irreparable damage to your Mamba XLX2 controller. |
| Battery Capacity Minimum: | The Mamba XLX2 is a high-performance controller; you must use high-discharge cells in your high-performance application to ensure vehicle performance. Recommended battery capacity is 5000mAh. We recommend using 50C continuous discharge or higher LiPo batteries. |
| Wiring and Soldering: | High strand count silicone coated copper wire is essential with higher power electric power systems. Castle Creations' wire is lower resistance than the same diameter of solid copper, meaning more power gets from the batteries to the motor with less wasted as heat. The ultra-high strand count and silicone coating means the wire is very flexible which prevents work hardening and breakage with use. |
| Connector Ratings Minimum: | The Mamba XLX2 requires the use of connectors designed for 150+ amps continuous. Ex. Castle 6.5mm polarized or 8mm bullet. |
| Motors: | The Mamba XLX2 is capable of handling incredible amounts of power, your motor must also be up for the task. Always run your motor within the manufacturer’s specs. Monitor motor, battery, and controller temps carefully and never let the motor get above 200° F. Excessive heat in the motor can damage the motor, the Mamba XLX2, and the batteries. |
| Gearing: | If you change your vehicles gearing, motor, or battery, check your motor, ESC and battery temperatures often on the first run. If components get too hot, increase the spur size, reduce the pinion size, or reduce the pack voltage. |
| Castle Link Settings: | During the optimization of your setup it is critical to check motor and ESC temperatures after making adjustment. The heat limit threshold for Mamba XLX2 ESC is 200° F and Castle motors is 200° F. We recommend the use of the data log as you progress with the feel and power of the vehicle. You will be able to record real-time data such as motor RPM, battery current and voltage, ESC and motor temperature, throttle input, and more. Download and analyze the collected data via Castle Link and make adjustments to maximize both performance and battery life. |
| AUX Wire: | The AUX wire allows you to adjust a setting “on-the-fly” using an auxiliary channel on your receiver. The AUX wire function is disabled by default and is programmable via Castle Link. Plug this wire into the auxiliary (#3/#4) channel on your receiver.
|
| Operating Environment Considerations: | Although Mamba XLX2 is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. |
| Product Features | |
 | Castle’s newest software technology, CRYO-DRIVE™ minimizes the amount of time the ESC's electrical components spend generating heat by optimally controlling which components are being used while driving the motor. This is happening thousands of times per second, which greatly reduces the rate at which the ESC heats up. This results in significantly improved thermal performance during partial throttle operation where the majority of driving occurs. Your setup will be able to handle higher gear ratios, in heavier vehicles, with longer runs. |
 | When paired with a Castle 4-POLE 12-SLOT SENSORED MOTOR
SmartSense™ software, enabled by default in the Castle Link Programming
Suite, will use the motor’s sensors to provide smooth starts, excellent
torque, and low-speed drivability. Once the motor is turning, it
seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with
electric timing. Smooth sensored startups and high-efficiency sensorless
running makes the Mamba XLX2 system produce more power and less heat.
QUIETSENSE™ is an innovative advancement in the design of sensored
motors to deliver the highest precision and most efficient startup. |
.png) | The Mamba XLX2 allows “on-the-fly” adjustments to be
made through the AUX wire once enabled in Castle Link. Once you have
selected an AUX wire function, that setting can then be tuned from your
transmitter while driving. Torque control, max throttle, max brake and
drag brake adjustments are a sampling of the available modes. This
real-time tuning allows you to quickly and easily fine-tune your system.
. Click here for additional information. |
.png) | Enabled by default, the Mamba XLX2 captures and records performance data from your vehicle. This allows you to view a detailed turn-by-turn record of what your ESC actually experienced during the run. You will be able to record real-time data such as motor RPM, battery current and voltage, ESC and motor temperature, throttle input, and more. Download and analyze the collected data via Castle Link and make adjustments to maximize both performance and battery life. |
 | For over 20 years Castle engineers have been setting the bar for industry leading software functionality. The Castle Link Programming Suite is your ticket to creating the perfect setup. To gain access to the host of tuning parameters, simply redeem the coupon for the Castle Link adapter included with your Mamba XLX2 purchase and download the simple to install software from our website and you are ready to personalize your controller's settings. You can now wirelessly program your ESC with the free Castle Link Mobile App and the purchase the B-Link Bluetooth Adapter. Click here for settings overview for the Mamba XLX2 ESC. |
 | You can now WIRELESSLY PROGRAM settings with the free Castle-Link app available on the Apple App store or Google Play for Android devices and the Castle B-Link™ Bluetooth™ Adapter (sold separately). It is compact and lightweight installed in your vehicle, for anytime programming! |
 | Mamba XLX2 is telemetry ready, which means owners of Futaba T4PX, 7PX and T7PXR Transmitters will be able to purchase the Castle Creations Telemetry Link for S.BUS2. Real-time data such as ESC temperature, voltages, and RPM can be monitored to ensure performance advantages and spare you the “unknown” parameters that all R/C enthusiasts experience at some point. Telemetry data provides another level of protection and can increase performance. |
 | Housed in a rugged CNC-machined aluminum case and then potted in waterproof epoxy. This not only protects the electronics but ensures any heat generated in the controller can easily be dissipated through the case. |
 | Mamba XLX2 features Audible Alerts that will notify you via audible chimes of possible issues with calibrations and error conditions to help diagnose problems. |
 | The Mamba XLX2 is proudly designed and manufactured in Olathe, Kansas USA and is backed by Castle Creations’ 1-year warranty and unparalleled "make-it-right" customer support. Call us, email us, or walk in our front door – we’re here to help. Click here for additional information about our Tier 1 and Tier II warranty. |