TALON 120 AMP, 12S / 50V WITH 20 AMP BEC
Product #: 010-0131-00
UPC code:819326010705
HIGH-VOLTAGE CASTLE POWER. BUILT TO FLY.
When your aircraft demands serious power, the Talon 120HV delivers.
Designed for 550, 600 and 700-size helicopters and giant-scale fixed-wing aircraft, the Talon 120HV combines 3S–12S LiPo capability, 120A continuous current and up to 6,000 watts of continuous power in a durable aluminum package built for demanding air applications.
POWER THE WHOLE AIRCRAFT
Big aircraft don't just demand power at the motor. High-torque servos and onboard electronics need a dependable supply of their own.
That's why the Talon 120HV incorporates a high-output BEC capable of up to 20A peak, with selectable 6V or 8V output voltage. The integrated design can simplify wiring and eliminate the need for a separate external BEC in many applications.
KEEP YOUR COOL
High power means heat, and managing it matters.
The Talon 120HV uses a sleek aluminum case to help dissipate heat during demanding operation. Installing the ESC beneath a canopy or inside a fuselage with limited airflow? An optional 40mm cooling fan is available separately for applications that need additional airflow.
MAKE IT YOURS WITH CASTLE LINK
Every aircraft and every pilot is different. Using the Castle Link USB Adapter and free Castle Link software*, you can configure the Talon 120HV to suit your setup and access Castle firmware updates as they become available.
YOUR ESC TALKS. LISTEN TO IT.
Talon ESCs provide audible motor tones and LED patterns that communicate power-system status and help identify operating conditions. Alerts include conditions such as over-temperature, excessive load and locked head-speed status, giving you valuable information about what's happening inside your power system.
CONNECTIONS & INSTALLATION
The Talon 120HV comes with built-in 5.5mm female bullet connectors, with matching 5.5mm male bullets included. The battery connector is sold separately. For high-power applications, Castle recommends 6.5mm polarized connectors.
- Telemetry Capable : Yes
- ESC Current Rating : 120
- Data Logging : No
- Auxiliary Wire : No
- Internal BEC : Yes
- Minimum Input Voltage : 3S
- Maximum Input Voltage : 12S
- Availability: This item is in stock.
| Technical Specs | |
|---|---|
| Input Voltage Range: | MIN: 3S LiPo MAX: 12S LiPo |
| Max Continuous Amperage at full throttle: | 120 amps* |
| Max Voltage: | 50.4V |
| BEC Voltage: | User selectable choice of 6 or 8 volts output |
| BEC Output: | 20 amp peak** 10 amp continuous (always check servo draw prior to first flight) |
| Size: | Width: 2.01" (51.1mm) Length: 4.15" (105.4mm) Depth: 0.80" (20.4mm) |
| Weight (w/wires): | 6.56 oz. (186g) |
| Connectors: | Built-in 5.5mm female bullets, matching 5.5mm male bullets included, battery connector sold separately. |
| Items Needed for Operation: | Battery connectors (sold separately) |
| Product Use Statements: | Remove BEC Power wire from receiver before connecting to Castle Link. Note: If using motors with stiff wires it is recommended to use extensions with flexible silicone wires to prevent stress to the female bullets on the ESC. |
| Application Guidelines: | Not intended for use with backup guards. If running an external BEC you must disconnect the middle wire (red) on the throttle lead and do not plug in the two-wire BEC lead. |
| Programmability: | Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Castle Link adapter included in package) and freely downloadable Castle Link Windows software. |
| Telemetry Link Capable: | Yes, except Battery Current |
| Tech Notes: | N/A |
| Resources | |
|---|---|
| Talon HV User Guide | Talon HV BEC Wire Warning |
*RC HOBBY APPLICATION RATING: 120 amps for the duration of a single10,000 mAh battery pack with the ESC in contact with a 5 mph airflow of25°C (77°F) or cooler air. Controller temperature must never exceed100°C (212°F). Exceeding current or temperature ratings may damagecomponents and may shorten the life of the ESC. Always verify systemcurrent draw at full-throttle. Decrease load or increase airflow todecrease the ESC’s operating temperature.
**Peak indicates amperage sustainable for 0.5 seconds - long enoughfor most servos’ current draw transients. Always confirm servo currentdraw before the first flight of the model.
This is a high power product with the potential to be very dangerous.Please read the safety information before use. This product may containchemicals known to the State of California to cause cancer and or birthdefects or other reproductive harm.
U.S. Patent # 7400103, 7492122, 7579796, 7740516, 8287328, 8678875, and 8905814 B2 - Other patents pending.
Controller designed and circuit boards manufactured, in Olathe, Kansas USA.
Controller assembled in Olathe, Kansas USA.
.png)
Power System Alerts
The Talon ESCs are programmed to sound a number of tunes and codes using the motor as well as flashing LED patterns to alert users to certain conditions regarding their power system, such as over temperature, excessive load and locked head speed.
Telemetry Capable
Telemetry has the potential not only to improve the safety of our models by monitoring battery voltages, ESC temperature, and other critical parameters, but it also creates other opportunities to get even more fun out of flying because you’ve essentially reduced the risks of “unknown” inevitable crashes. Think of the benefits to be had from alarms that will sound to warn you when there's interference about or if your receiver battery is running unexpectedly low. Requires purchase of Castle Telemetry Link for S.BUS2 (Item # 010-0152-00) and compatible Futaba Radio or Castle Telemetry Link for X-BUS (Item# 010-0148-00) and a compatible Spektrum Radio.
Warranty
Coupled with our unparalleled 1-year warranty and world-famous technical support, Castle provides confidence and peace of mind that your Talon 120 HV is a smart investment. In this day of “throw-away” electronics, put your investment in a trusted name with a proven track record of support and service.
Firmware Upgrade
Users will receive free access to all firmware updates, including added features sets using the Castle Link USB Programming Kit
Castle Link Compatible
With the Castle Link USB Programming Kit you can use your Windows™ PC to easily program your controller. Castle Link includes all code for all Castle Link compatible hobby products in one convenient download. Note: Castle Link software requires a Castle Link USB Adapter and a computer that is running Windows. Castle Link is compatible with Windows Vista, Windows 7, Windows 8 and Windows 10.Macintosh users may take advantage of software such as Parallels Desktop, VMware Fusion, or Apple's Boot Camp along with Windows Vista, Windows 7, Windows 8, or Windows10 to run the Castle Link software, provided the Macintosh has an Intel processor. Macintosh installation is not supported by Castle Creations.
Additional Castle Link benefits include:
- Access expanded programming and parameters for Castle controllers (see overview below)
- Access to all firmware updates, including added features sets released from Castle Engineering, at no charge.
- Intuitive Demo Mode capability
- Ability to default ESC to factory settings
- Ability to save setup profiles for later use
- Ability to download and view data logs (on applicable controllers)
