TALON 35 AMP ESC, 6S / 25V WITH 7 AMP BEC
Product #: 010-0122-00
UPC code:819326010545
LITTLE PACKAGE. BIG BEC.
STEP UP THE POWER. NOT THE BULK.
The Castle Talon 35 brings more current capability and increased continuous BEC power to demanding mid-size RC air applications—without giving up the compact Talon footprint.
Supporting 2S–6S LiPo power and up to 35 amps of continuous current, Talon 35 is designed for 450-size helicopter setups and .10–.20 fixed-wing applications pulling up to 35 amps.
At just 27.8 grams with wires, it's a compact solution for pilots who need more from both their motor controller and onboard electronics.
MORE BEC POWER ON BOARD.
As aircraft and servo demands increase, the power system needs to keep up.
Talon 35 incorporates a 5.5V BEC rated at 5 amps continuous and 7 amps peak—a significant increase in sustained BEC capability over the Talon 15 and Talon 25.
The integrated BEC supplies compatible receivers and servos directly from the ESC, helping simplify wiring and eliminate the need for a separate BEC in appropriate applications.
Always verify servo current draw before first flight. Peak BEC output indicates amperage sustainable for 0.5 seconds.
PROGRAM IT FOR THE WAY YOU FLY.
Connect Talon 35 to Castle Link and configure the ESC around your aircraft and flying style.
Depending on selected vehicle type, available settings include throttle and governor modes, brake behavior, voltage cutoff, Auto-LiPo settings, motor start power, timing, direction, PWM rate, and Power-On Beep.
For helicopter applications, Castle Link provides Simple, Gov Low/High and Set RPM governor modes, giving pilots additional control over rotor-head-speed management.
LEARN MORE ABOUT CASTLE LINK
POWER SYSTEM ALERTS
Talon 35 uses audible motor tones and LED patterns to communicate ESC status and operating conditions.
Power System Alerts provide information including power-up and cell count, arming, low-voltage cutoff, over-temperature, excessive load, start failure, radio signal issues, motor anomalies, over-current and BEC over-temperature, along with additional operating-status indications.
VIEW TALON OPERATIONAL TONES & ERROR CODES
COMPACT WHERE IT COUNTS.
Talon 35 measures just 49 × 22.4 × 8.4mm and weighs 27.8g with wires, providing 35A performance and increased BEC capability in a slim package designed for space-conscious air installations.
Battery and motor connectors are sold separately so you can select the appropriate connectors for your power system.
DESIGNED, ASSEMBLED & SUPPORTED IN OLATHE, KANSAS, USA.
- Telemetry Capable : Yes
- ESC Current Rating : 35
- Data Logging : No
- Auxiliary Wire : No
- Internal BEC : Yes
- Minimum Input Voltage : 2S
- Maximum Input Voltage : 6S
- Availability: This item is in stock.
| Technical Specs | |
|---|---|
| Input Voltage Range: | MIN: 2S LiPo MAX: 6S LiPo |
| Max Continuous Amperage at full throttle: | 35 amps* |
| Max Voltage: | N/A |
| BEC Voltage: | 5.5 volts |
| BEC Output: | 7 amp peak** 5 amp continuous (always check servo draw prior to first flight) |
| Size: | Width: 0.88" (22.4mm) Length: 1.93" (49mm) Depth: 0.33" (8.4mm) |
| Weight: | 0.98 oz. (27.8g) with wires 0.42 oz (12g) without wires |
| Connectors: | N/A |
| Items Needed for Operation: | Battery and motor connectors sold separately. |
| Product Use Statements: | N/A |
| Application Guidelines: | N/A |
| Programmability: | Fully programmable Castle feature set using Castle Link USB adapter and freely downloadable Castle Link Windows software or the Castle Link Mobile App and a B-Link 2 Bluetooth Adapter. A small subset of the settings available through Castle Link Windows software can be accessed via manual programming through the transmitter stick.. |
| Telemetry Link Capable: | Yes, except Battery Current |
| Tech Notes: | N/A |
| Resources | |
|---|---|
| Talon User Guide | Talon 35 Tech Drawing |
*RC HOBBY APPLICATION RATING: 35 amps for the duration of a single4,000 mAh battery pack with the ESC in contact with a 5 mph airflow of25C (77F) or cooler air. Controller temperature must never exceed 100C(212F). Exceeding current or temperature ratings may damage componentsand may shorten the life of the ESC. Always verify system current drawat full-throttle. Decrease load or increase airflow to decrease theESC’s operating temperature.
**Peak indicates amperage sustainable for 0.5 seconds - long enoughfor most servos’ current draw transients. Always confirm servo currentdraw before the first flight of the model.
This is a high power product with the potential to be very dangerous.Please read the safety information before use. This product may containchemicals known to the State of California to cause cancer and or birthdefects or other reproductive harm.
U.S. Patent # 7400103, 7492122, 7579796, 7740516, 8287328, 8678875, and 8905814 B2 - Other patents pending.
Controller designed and circuit boards manufactured, in Olathe, Kansas USA.
Controller assembled in Olathe, Kansas USA.
.png)
| Product Features | |
| Power System Alerts: | The Talon ESCs are programmed to sound a number of tunes and codes using the motor as well as flashing LED patterns to alert users to certain conditions regarding their power system, such as over temperature, excessive load and locked head speed. |
| Telemetry Capable: | Telemetry has the potential not only to improve the safety of our models by monitoring battery voltages, ESC temperature, and other critical parameters, but it also creates other opportunities to get even more fun out of flying because you’ve essentially reduced the risks of “unknown” inevitable crashes. Think of the benefits to be had from alarms that will sound to warn you when there's interference about or if your receiver battery is running unexpectedly low. Requires purchase of Castle Telemetry Link for S.BUS2 (Item # 010-0152-00) and compatible Futaba Radio or Castle Telemetry Link for X-BUS (Item# 010-0148-00) and a compatible Spektrum Radio. |
| Warranty: | Castle Creations, Inc. warrants this product to be free from manufacturing defects for a period of one year from date of purchase. |
| Programmability: | Fully programmable Castle feature set using Castle Link USB Adapter and freely downloadable Castle Link Windows software or the Castle Link mobile app and a B-LINK2 Bluetooth Adapter (sold separately). A small subset of the settings available through Castle Link Windows software can be accessed via manual programming through the transmitter stick. |
| Firmware Upgrade: | Users will receive free access to all firmware updates, including added features sets using the Castle Link USB Programming Kit |
Castle Link Compatible
With the Castle Link USB Programming Kit you can use your Windows™ PC to easily program your controller. Castle Link includes all code for all Castle Link compatible hobby products in one convenient download. Note: Castle Link software requires a Castle Link USB Adapter and a computer that is running Windows 10 or higher.
Additional Castle Link benefits include:
- Access expanded programming and parameters for Castle controllers (see overview below)
- Access to all firmware updates, including added features sets released from Castle Engineering, at no charge.
- Intuitive Demo Mode capability
- Ability to default ESC to factory settings
- Ability to save setup profiles for later use
- Ability to download and view data logs (on applicable controllers)
| Talon/Talon HV Castle Link Settings Overview | ||||
| Throttle Vehicle Type: | Airplane | Helicopter | Control Line | External Governor |
| Throttle type: | Auto-Calibrating Throttle | Fixed-Endpoints | Governor Mode:
| Fixed-Endpoints |
| Fixed-Endpoints | Governor Mode:
| |||
| Brake: |
| N/A |
| N/A |
| Cutoffs: |
|
|
|
|
| Motor: |
|
|
|
|
| Other: |
|
|
|
|
