CASTLE SERIES WIRE HARNESS T-PLUG
Product #: 011-0167-00
Double up on power!
The Castle Series Wire Harness with T-PLUG connectors allows you to connect two battery packs in series, combining the voltage of your batteries. For example: two 3S (11.1v) packs will have the output voltage of 6S (22.2v) when connected with this harness.
Note: You must always use identically prepared packs with this harness. Both packs must be fully charged and properly balanced. Both packs must be by the same manufacturer, have the same C rating, and both must have the same capacity and level of charge at all times. Failure to observe this warning will result in damage to your batteries.
- Accessories : Wiring and Connectors
- Availability: This item is in stock.
| Technical Specs | |
|---|---|
| Connector Size: | T-PLUG |
| Wire gauge: | 10AWG |
| Connector to connector wire length: | 5" (127mm) |
| Overall length: | N/A |
| Weight: | N/A |
For support, frequently asked questions, technical documents, and more, visit our support site.