- My Account
- Get Castle Link
- HOT DEALS!
Mamba Monster 2 Extreme 1:8 Scale ESC
Product #: 010-0108-00
Brute Power and Sheer Stamina!
Mamba Monster 2 is capable of 2S LiPo to a maximum of 6S LiPo. It's also waterproof*, so you can run your vehicle across the morning dew, through soggy snow, or just about anywhere else you’d be interested in running a 1:8 scale RC buggy or truck. It features an easy-access case allowing you to replace fans quickly, if necessary. Additionally, Mamba Monster 2 features solder posts, so changing battery wire length and direction is simple for an even more custom install.
*Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.
- Waterproof : Yes
- Telemetry Capable : No
- Data Logging : No
- Auxiliary Wire : No
- Minimum Input Voltage : 2S
- Maximum Input Voltage : 6S
- Sensored Capable : No
- Recon G6 Certified ESC : No
- ROAR Certified ESC : No
- Availability: Note-This item is out of stock and will be backordered.
Castle Link Compatible
With the Castle Link USB Programming kit you can use your Windows™ PC to easily program your controller. Adjustable settings include:
- Throttle Curve
- Braking Curve
- Drag Brake
- Auto LiPo cutoff
- Punch Control
- Reverse Type
- Motor Type
Additional Castle Link benefits include:
- Access to all firmware updates, including added features sets released from Castle Engineering, at no charge.
- Intuitive Demo Mode capability
- Ability to save setup profiles for later use
|Input Voltage Range:||MIN: 2S LiPo
MAX: 6S LiPo
|BEC Specifications:||User selectable output between 5 and 7 volts; default 5.5 volts
|Operating Environment:||Waterproof* design allows for use in nearly any environment|
|Reversible:||Yes, but may be disabled for racing|
|Cooling Fan:||Yes, factory equipped, fully removable** (see Product Use Statements below)|
|Size:||Length: 2.19" (56mm)
Width: 1.86" (47mm)
Height: 1.33" (34mm)
|Weight (with no battery connector):||3.93 oz. (111.5 g)|
|Connectors:||6.5mm female bullets for motor connection.
|Items Needed for Operation:||Battery Connector required - 6.5mm Castle Connectors are recommended.|
|Product Use Statements:||*Although Monster 2 and Castle brushless motors are waterproof, they are not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.
**The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.
|Application Guidelines:||Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 15 lbs, with batteries, ready-to-run.|
|Recommended Motors:||Neu-Castle 1512 2650Kv: Max Cells: 4S Lipo or 12 NiMH
Neu-Castle 1515 2200Kv: Max Cells: 6S Lipo or 16 NiMH
|Max. Recommended Vehicle Weight:||Less than 15 lbs, with batteries, ready-to-run with 2200kv motor; no more than 9 lbs with 2650kv motor.
|Programmability:||Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Link included) and freely downloadable Castle Link Windows software.|
|Telemetry Link Capable:||No|
|Tech Notes:||Not all LiPos are created equal, and surge ratings should never be used to determine a pack’s suitability for a brushless application. Use the CONTINUOUS C rating only. Mamba Monster setups frequently hit 100+ amps in peaks. We strongly suggest using 5,000 mAh or larger LiPo cells with a discharge rating of at least 30C (or high quality 25C batteries such as Traxxas® Power Cells®). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups.|
|Monster 2 Driver's Ed Guide||Monster 2 Quick Start Guide|
Castle Creations, Inc. warrants this product to be free from manufacturing defects for a period of one year from date of purchase.
This is a high power product with the potential to be very dangerous. Please read the safety information before use. This product may contain chemicals known to the State of California to cause cancer and or birth defects or other reproductive harm.
U.S. Patent # 7400103, 7492122, 7579796, 7740516, 8287328, 8678875, and 8905814 B2 - Other patents pending.
Controller designed, and circuit boards manufactured, in Olathe, Kansas USA.
Controller assembled in Mexico.