ESC COOLING FAN - MAMBA XLX2
Product #: 011-0156-00
This 50mm ESC cooling fan is a direct replacement and fits the Mamba XLX2 ESC.
Installation Instructions:
1. Unplug the fan from the ESC's receiver harness.
2. Locate the four screws on top of the ESC.
3. Remove all four screws with the appropriate driver.
4. Remove the fan shroud and old fan, replace with the new fan by reversing steps 3 through 1.
Installation Instructions:
1. Unplug the fan from the ESC's receiver harness.
2. Locate the four screws on top of the ESC.
3. Remove all four screws with the appropriate driver.
4. Remove the fan shroud and old fan, replace with the new fan by reversing steps 3 through 1.
| Technical Specs | |
|---|---|
| Input voltage: | 7 - 13.8 volts |
| Maximum RPM: | 6,000 RPM |
| Waterproof: | No, remove before exposing ESC to moisture. |
Warranty Note: Use in an RC car or truck potentially exposes the fan to dirt and other environmental objects that are considered abuse to the fan. For this reason we keep the replacement cost of fans low, but must limit the warranty on a fan to 60 days from the date of purchase.
This product may contain chemicals known to the State of California to cause cancer and or birth defects or other reproductive harm.
Product designed in Olathe, Kansas USA.
Product made in China.