CASTLE SERIES WIRE HARNESS T-PLUG
Press and move to zoom
Mouse over image to zoom

CASTLE SERIES WIRE HARNESS T-PLUG

Product #: 011-0167-00

USD $19.95 /EA
List Price: USD $24.45 /EA
  • Accessories : Wiring and Connectors
    • EA
  • Tell a Friend
  • Availability: This item is in stock.

Double up on power!

The Castle Series Wire Harness with T-PLUG connectors allows you to connect two battery packs in series, combining the voltage of your batteries. For example: two 3S (11.1v) packs will have the output voltage of 6S (22.2v) when connected with this harness.

Note: You must always use identically prepared packs with this harness. Both packs must be fully charged and properly balanced. Both packs must be by the same manufacturer, have the same C rating, and both must have the same capacity and level of charge at all times. Failure to observe this warning will result in damage to your batteries.

Technical Specs
Connector Size: T-PLUG
Wire gauge: 10AWG
Connector to connector wire length: 5" (127mm)
Overall length: N/A
Weight: N/A
For support, frequently asked questions, technical documents, and more, visit our support site.
Average rating:
Rate this product:

Recently Viewed

1:18th SCALE MOTOR, INRUNNER, 0808-8200KV
  • USD $59.95 /EA
  • List Price USD $73.35 /EA
TALON 15 AMP ESC, 4S / 16V WITH 8 AMP BEC
  • USD $49.95 /EA
  • List Price USD $61.15 /EA
MONSTER 2 1:8TH 25V ESC WATERPROOF W / 2200KV V2 MOTOR SENSORED
  • USD $294.95 /EA
  • List Price USD $360.90 /EA
Phoenix Edge HV 40 AMP ESC, 12S / 50.4V, no BEC
  • USD $144.95 /EA
  • List Price USD $177.35 /EA
PHOENIX EDGE LITE HV 160 AMP ESC, 12S / 50.4V, NO BEC
  • USD $339.95 /EA
  • List Price USD $415.95 /EA