CASTLE SERIES WIRE HARNESS T-PLUG
Press and move to zoom
Mouse over image to zoom

CASTLE SERIES WIRE HARNESS T-PLUG

Product #: 011-0167-00

USD $19.95 /EA
List Price: USD $24.45 /EA
  • Accessories : Wiring and Connectors
    • EA
  • Tell a Friend
  • Availability: This item is in stock.

Double up on power!

The Castle Series Wire Harness with T-PLUG connectors allows you to connect two battery packs in series, combining the voltage of your batteries. For example: two 3S (11.1v) packs will have the output voltage of 6S (22.2v) when connected with this harness.

Note: You must always use identically prepared packs with this harness. Both packs must be fully charged and properly balanced. Both packs must be by the same manufacturer, have the same C rating, and both must have the same capacity and level of charge at all times. Failure to observe this warning will result in damage to your batteries.

Technical Specs
Connector Size: T-PLUG
Wire gauge: 10AWG
Connector to connector wire length: 5" (127mm)
Overall length: N/A
Weight: N/A
For support, frequently asked questions, technical documents, and more, visit our support site.
Average rating:
Rate this product:

Recently Viewed

Castle 10th Scale 1406 Sensored Motor - 6900Kv
  • USD $99.95 /EA
  • List Price USD $122.30 /EA
CC BULLETS - 8MM FEMALE ONLY (100-PACK)
  • USD $75.00 /EA
  • List Price USD $92.00 /EA
TALON 35 AMP ESC, 6S / 25V WITH 7 AMP BEC
  • USD $69.95 /EA
  • List Price USD $85.60 /EA
Phoenix Edge 100 AMP ESC, 8S / 33.6V with 5 AMP BEC
  • USD $154.95 /EA
  • List Price USD $189.60 /EA