Rotor / Shaft Replacement Rebuild Kit 1406-7700Kv
Product #: 011-0125-00
Overheated your motor? Broke the output shaft? This rotor replacement kit allows you to repair a damaged rotor or shaft. It is easy to replace and contains all of the parts necessary to get your motor back up and running.
This kit works with the sensored 1406 7700kv only (P/N 060-0059-00).
It has the standard 3.2mm output shaft.
If you need a replacement front end bell (shaft side) and bearing, see part number 011-0133-00.
Kit Contains:
Rotor Assembly - qty 1
Brass Spacers - qty 2
Wave Washer - qty 1
Note: This rotor replace is NOT compatible with older sensorless motors. Sensorless motors are easily identifiable by their red, black and white motor wires; sensored motors have all black motor wires.
This kit works with the sensored 1406 7700kv only (P/N 060-0059-00).
It has the standard 3.2mm output shaft.
If you need a replacement front end bell (shaft side) and bearing, see part number 011-0133-00.
Kit Contains:
Rotor Assembly - qty 1
Brass Spacers - qty 2
Wave Washer - qty 1
Note: This rotor replace is NOT compatible with older sensorless motors. Sensorless motors are easily identifiable by their red, black and white motor wires; sensored motors have all black motor wires.
For instructions on how to install the replacement rotor, please visit https://www.castlecreations.com/motorrepair.
Note: Replacement rotors for 17xx and 20xx series motors are not available. These parts are not serviceable and cannot be repaired or replaced. If the rotor is broken, the shaft is bent, or snapped, the entire motor must be replaced.
Note: Replacement rotors for 17xx and 20xx series motors are not available. These parts are not serviceable and cannot be repaired or replaced. If the rotor is broken, the shaft is bent, or snapped, the entire motor must be replaced.