CASTLE SERIES WIRE HARNESS T-PLUG
Press and move to zoom
Mouse over image to zoom

CASTLE SERIES WIRE HARNESS T-PLUG

Product #: 011-0167-00

Double up on power!

The Castle Series Wire Harness with T-PLUG connectors allows you to connect two battery packs in series, combining the voltage of your batteries. For example: two 3S (11.1v) packs will have the output voltage of 6S (22.2v) when connected with this harness.

Note: You must always use identically prepared packs with this harness. Both packs must be fully charged and properly balanced. Both packs must be by the same manufacturer, have the same C rating, and both must have the same capacity and level of charge at all times. Failure to observe this warning will result in damage to your batteries.

USD $19.95 /EA
List Price: USD $24.45 /EA
  • Accessories : Wiring and Connectors
    • EA
  • Availability: This item is in stock.
Technical Specs
Connector Size: T-PLUG
Wire gauge: 10AWG
Connector to connector wire length: 5" (127mm)
Overall length: N/A
Weight: N/A
For support, frequently asked questions, technical documents, and more, visit our support site.
Average rating:
Rate this product:

Recently Viewed

TALON 25 AMP ESC, 6S / 25V WITH 8 AMP BEC
  • USD $47.95 /EA
  • List Price USD $73.35 /EA
Castle 10th Scale SCT 1410 Sensored Motor - 3800Kv
  • USD $119.95 /EA
  • List Price USD $146.80 /EA
Mamba XL X Extreme 1:5 Scale ESC
  • USD $120.00 /EA
  • List Price USD $274.95 /EA
TALON 60 , 6S / 25.2V, 60 AMP ESC WITH 20 AMP BEC
  • USD $89.95 /EA
  • List Price USD $110.10 /EA
TALON 90 AMP ESC, 6S / 25.2V WITH 20 AMP BEC W / 5.5MM CONNECTORS
  • USD $109.95 /EA
  • List Price USD $134.55 /EA