CASTLE SERIES WIRE HARNESS T-PLUG
Press and move to zoom
Mouse over image to zoom

CASTLE SERIES WIRE HARNESS T-PLUG

Product #: 011-0167-00

USD $13.95 /EA
List Price: USD $16.95 /EA
  • Accessories : Wiring and Connectors
    • EA
  • Tell a Friend
  • Availability: This item is in stock.

Double up on power!

The Castle Series Wire Harness with T-PLUG connectors allows you to connect two battery packs in series, combining the voltage of your batteries. For example: two 3S (11.1v) packs will have the output voltage of 6S (22.2v) when connected with this harness.

Note: You must always use identically prepared packs with this harness. Both packs must be fully charged and properly balanced. Both packs must be by the same manufacturer, have the same C rating, and both must have the same capacity and level of charge at all times. Failure to observe this warning will result in damage to your batteries.

Technical Specs
Connector Size: T-PLUG
Wire gauge: 10AWG
Connector to connector wire length: 5" (127mm)
Overall length: N/A
Weight: N/A
For support, frequently asked questions, technical documents, and more, visit our support site.
Average rating:
Rate this product:

Recently Viewed

MAMBA MONSTER X 8s, 33.6V ESC W / 1520-1650KV V2 SENSORED MOTOR
  • USD $379.95 /EA
  • List Price USD $463.95 /EA
MONSTER X 25.2V ESC, 8A PEAK BEC W / 1512-1800KV SENSORED MOTOR
  • USD $299.95 /EA
  • List Price USD $365.95 /EA
CC Bullets - 5.5mm
  • USD $8.95 /EA
  • List Price USD $10.95 /EA
Polarized Series Wire Harness with 4.0mm Castle Connectors
  • USD $8.00 /EA
  • List Price USD $20.95 /EA
Polarized Castle Connectors - 6.5mm Male Multi-Pack
  • USD $11.95 /EA
  • List Price USD $14.95 /EA