TALON 25 AMP ESC, 6S / 25V WITH 8 AMP BEC
Product #: 010-0128-00
UPC code:819326010682
COMPACT AND COOL.
6S CAPABILITY. WITHOUT THE BULK.
The Castle Talon 25 delivers programmable brushless power in a compact ESC built for RC aircraft where space and weight still matter—but performance demands are growing.
Supporting 2S–6S LiPo power and up to 25 amps of continuous current, the Talon 25 is designed for most 400-size helicopter setups and 3D foamies pulling up to 25 amps.
At only 17.9 grams with wires, Talon 25 combines 6S capability, an integrated BEC and Castle Link programmability in a remarkably compact package.
BUILT-IN BEC. LESS TO INSTALL.
Talon 25 incorporates a 5.5V BEC rated at 3 amps continuous and 8 amps peak, providing onboard power for compatible receivers and servos and eliminating the need for a separate BEC in appropriate applications.
That means fewer components, simpler wiring and less weight competing for space in compact aircraft.
Always verify servo current draw before first flight. Peak BEC output indicates amperage sustainable for 0.5 seconds.
PROGRAM IT FOR THE WAY YOU FLY.
Connect Talon 25 to Castle Link to configure the ESC around your aircraft and flying setup.
Depending on selected vehicle type, Castle Link provides access to settings including throttle and governor modes, brake behavior, voltage cutoff, Auto-LiPo settings, motor start power, timing, direction, PWM rate, and Power-On Beep.
For helicopter applications, available governor options include Simple, Gov Low/High and Set RPM, giving Talon 25 considerably more setup flexibility than its compact size might suggest.
LEARN MORE ABOUT CASTLE LINK ?
POWER SYSTEM ALERTS
Talon 25 uses audible motor tones and LED patterns to communicate power-system status and operating conditions.
The alert system provides information including power-up and cell count, arming, low-voltage cutoff, over-temperature, excessive load, start failure, radio signal issues, motor anomalies, over-current and BEC over-temperature, along with additional operating-status indications.
VIEW TALON OPERATIONAL TONES & ERROR CODES ?
COMPACT BY DESIGN.
Measuring only 43.7mm long × 18.2mm wide × 8.1mm deep, the Talon 25 delivers 6S capability without requiring much real estate in the aircraft.
It weighs just 17.9g with wires and 7.9g without wires. Battery and motor connectors are sold separately, allowing the installer to select connectors appropriate for the application.
DESIGNED, ASSEMBLED & SUPPORTED IN OLATHE, KANSAS, USA.
- Telemetry Capable : Yes
- ESC Current Rating : 25
- Data Logging : No
- Auxiliary Wire : No
- Internal BEC : Yes
- Minimum Input Voltage : 2S
- Maximum Input Voltage : 6S
- Availability: This item is in stock.
| Technical Specs | |
|---|---|
| Input Voltage Range: | MIN: 2S LiPo MAX: 6S LiPo |
| Max Continuous Amperage at full throttle: | 25 amps* |
| Max Voltage: | 25.2V |
| BEC Voltage: | 5.5 volts |
| BEC Output: | 8 amp peak** 3 amp continuous (always check servo draw prior to first flight) |
| Size: | Width: 0.72" (18.2mm) Length: 1.72" (43.7mm) Depth: 0.32" (8.1mm) |
| Weight (w/wires): | 0.63 oz. (17.9g) 0.28 oz (7.9g) without wires |
| Connectors: | N/A |
| Items Needed for Operation: |
|
| Product Use Statements: | N/A |
| Application Guidelines: | N/A |
| Programmability: | Fully programmable Castle feature set using Castle Link USB adapter and freely downloadable Castle Link Windows software or the Castle Link Mobile App and a B-Link 2 Bluetooth Adapter. A small subset of the settings available through Castle Link Windows software can be accessed via manual programming through the transmitter stick. |
| Telemetry Link Capable: | Yes, except Battery Current |
| Tech Notes: | N/A |
| Resources | |
|---|---|
| Talon User Guide | Talon 25 Tech Drawing |
*RC HOBBY APPLICATION RATING: 25 amps for the duration of a single4,000 mAh battery pack with the ESC in contact with a 5 mph airflow of25C (77F) or cooler air. Controller temperature must never exceed 100C(212F). Exceeding current or temperature ratings may damage componentsand may shorten the life of the ESC. Always verify system current drawat full-throttle. Decrease load or increase airflow to decrease theESC’s operating temperature.
**Peak indicates amperage sustainable for 0.5 seconds - long enoughfor most servos’ current draw transients. Always confirm servo currentdraw before the first flight of the model.
This is a high power product with the potential to be very dangerous.Please read the safety information before use. This product may containchemicals known to the State of California to cause cancer and or birthdefects or other reproductive harm.
U.S. Patent # 7400103, 7492122, 7579796, 7740516, 8287328, 8678875, and 8905814 B2 - Other patents pending.
Controller designed and circuit boards manufactured, in Olathe, Kansas USA.
Controller assembled in Olathe, Kansas USA.
.png)
| Product Features | |
| Power System Alerts: | The Talon ESCs are programmed to sound a number of tunes and codes using the motor as well as flashing LED patterns to alert users to certain conditions regarding their power system, such as over temperature, excessive load and locked head speed. |
| Telemetry Capable: | Telemetry has the potential not only to improve the safety of our models by monitoring battery voltages, ESC temperature, and other critical parameters, but it also creates other opportunities to get even more fun out of flying because you’ve essentially reduced the risks of “unknown” inevitable crashes. Think of the benefits to be had from alarms that will sound to warn you when there's interference about or if your receiver battery is running unexpectedly low. Requires purchase of Castle Telemetry Link for S.BUS2 (Item # 010-0152-00) and compatible Futaba Radio or Castle Telemetry Link for X-BUS (Item# 010-0148-00) and a compatible Spektrum Radio. |
| Warranty: | Castle Creations, Inc. warrants this product to be free from manufacturing defects for a period of one year from date of purchase. |
| Programmability: | Fully programmable Castle feature set using Castle Link USB Adapter and freely downloadable Castle Link Windows software or the Castle Link mobile app and a B-LINK2 Bluetooth Adapter (sold separately). A small subset of the settings available through Castle Link Windows software can be accessed via manual programming through the transmitter stick. |
| Firmware Upgrade: | Users will receive free access to all firmware updates, including added features sets using the Castle Link USB Programming Kit |
Castle Link Compatible
With the Castle Link USB Programming Kit you can use your Windows™ PC to easily program your controller. Castle Link includes all code for all Castle Link compatible hobby products in one convenient download. Note: Castle Link software requires a Castle Link USB Adapter and a computer that is running Windows 10 or higher.
Additional Castle Link benefits include:
- Access expanded programming and parameters for Castle controllers (see overview below)
- Access to all firmware updates, including added features sets released from Castle Engineering, at no charge.
- Intuitive Demo Mode capability
- Ability to default ESC to factory settings
- Ability to save setup profiles for later use
- Ability to download and view data logs (on applicable controllers)
| Talon/Talon HV Castle Link Settings Overview | ||||
| Throttle Vehicle Type: | Airplane | Helicopter | Control Line | External Governor |
| Throttle type: | Auto-Calibrating Throttle | Fixed-Endpoints | Governor Mode:
| Fixed-Endpoints |
| Fixed-Endpoints | Governor Mode:
| |||
| Brake: |
| N/A |
| N/A |
| Cutoffs: |
|
|
|
|
| Motor: |
|
|
|
|
| Other: |
|
|
|
|
