Field Link Portable Programmer for Driving
Product #: 010-0063-00
Program your controllers in the field!
Field Link Portable Programmer allows you to modify the most commonly used settings in your Castle controller at the touch of a single button.
Field Link for Driving settings:
- Cutoff voltage
- Auto LiPo cutoff volts per cell (3.0, 3.1, 3.2, 3.4, 3.5)
- Drag brake
- Brake strength
- Punch control
- Reverse type
- Motor type
- Motor timing and C.H.E.A.T. mode*
*C.H.E.A.T. mode is a feature of the Mamba Max Pro and Mamba X ESCs only.
This package includes one Field Link portable programmer specifically made to work with Castle surface controllers, and a USB cable. For air controllers, see the Field Link for Flying.
- Availability: This item is in stock.
Full Castle Link Functionality
This Field Link portable programmer can also act as a Castle Link USB Programming kit, allowing you to connect your controller to your Windows™ PC for easy programming. Adjustable settings include:
- Braking curve
- Drag brake
- Auto LiPo cutoff
- Punch Control
- Reverse Type
- Motor Type
Additional Castle Link benefits include:
- Access to all firmware updates, including added features sets released from Castle Engineering, at no charge.
- Intuitive Demo Mode capability
- Ability to save setup profiles for later use
|Field Link Settings ESC Compatibility|
|Auto LiPo volts/cell|
|Motor timing and CHEAT mode*|
*C.H.E.A.T. mode is a feature of the Mamba Max Pro, Mamba X and Mamba Monster X ESC only.
|System requirements:||Castle Link software is compatible with Windows Vista, Windows 7, Windows 8 and Windows 10.|
|Items needed for operation:||Field Link contains a proprietary interface adapter and standard USB cable. All you need is an available USB port on your PC.|
Field Link Portable Programmer for Driving works with all Castle Link compatible car controllers including: Sidewinder Micro, Mamba 25, Mamba Micro Pro, Sidewinder 3, Mamba Max (only connects using the throttle cable. You must upgrade the Mamba Max to software version 1.23 or higher with your Windows PC to enable throttle cable USB connectivity), Mamba Max Pro, and Mamba Monster (all versions).
Requires USB 2.0 on a Windows PC running Castle Link software.
Field Link card cannot change settings on controller series that do not have the listed settings. See settings compatibility chart above for details.
Macintosh users may take advantage of software such as Parallels Desktop, VMware Fusion, or Apple's Boot Camp along with Windows Vista, Windows 7, Windows 8 and Windows 10. to run the Castle Link software, provided the Macintosh has an Intel processor. Macintosh installation is not supported by Castle Creations.
If your Field Link LEDs are flashing continuously, it is likely in need of a firmware update. See the Field Link Firmware Compatibility page for more details.