SURFACE ESC: GHOST RC, COBRA 8 ACE

SURFACE ESC: GHOST RC, COBRA 8 ACE

$264.95
Skip to product information
SURFACE ESC: GHOST RC, COBRA 8 ACE

SURFACE ESC: GHOST RC, COBRA 8 ACE

020-0270-00
$264.95
Castle is thrilled to partner with Ghost RC in releasing the Cobra 8 ACE. The Cobra 8 ACE is built on our Cobra 8 ESC but with enhanced drag racing features and beefed up to handle the extreme conditions of drag racing. It is engineered with cutting-edge technology tailored specifically for 1/10th Drag Racing vehicles.
Tech Note: An external capacitor pack (011-0148-00) must be used with the Ghost RC Cobra 8 ACE. Failure to use an external capacitor pack will affect ESC performance and can lead to damage.

Waterproof: Yes
Telemetry Capable: No
Data Logging: Yes
Auxiliary Wire: Yes
Minimum Input Voltage: 2s
Maximum Input Voltage: 4s
Sensored Capable: Yes
Recon G6 Certified Motor: No
ROAR Certified Motor: No
CRYO-DRIVE: Yes
B-link Compatible: Yes


Package Includes:

  • Ghost RC Cobra 8 ACE ESC
  • Castle Link V4 USB Adapter
  • 300mm Direct Connect Sensor Wire

SUPPORT: Castle Creations does not provide technical support or service on Ghost RC products, nor does Castle offer trade-ins for this product as it is not a Castle product. Please contact Ghost RC for any questions regarding their products.

WARRANTY: Due to the abusive nature of drag and speed run setups, Castle nor Ghost RC is liable for incidental or consequential damages to other equipment such as ESCs and batteries when using this motor and is not responsible for failures resulting from abuse, improper installation, misapplication or alteration. Caution must be used in setup selection and ESC tuning. This product is for advanced users in drag racing applications. Due to the aggressive and abusive nature of drag racing, this product is sold with no warranty.

WARNING: Drag and speed run setups are inherently abusive and extremely hard on all electronic components. Every component in the configuration can be strained, weakened (or worse) without using extreme caution, observance of electric theory and advanced knowledge of all aspects of the RC hobby. High speed runs and drag racing are the most advanced, aggressive and volatile applications in the RC car hobby. Improper setup or use of this product can result in catastrophic failures of the motor, ESC and/or batteries. 

Cobra 8 ACE Key Features:

  • 32-Bit Processing power for smoother motor control and improved response time.
  • Enhanced Data Logging includes:
    • Double the maximum sample frequency of older generations.
    • 8x increased logging time of older generations.
    • Data point for ESC electrical motor timing.
    • Data point for acceleration via onboard accelerometer.
    • Looping feature prevents interruptions in data log recording.
    • Ability to download specific sessions.
  • Highly adjustable internal BEC (5.0V - 8.0V adjustable in 0.1V increments)
  • Access to tuning options and firmware updates for free with Castle Link V4 USB programmer included with purchase. Now with USB-C connector! (Requires Windows 10 or higher)
  • Optional smartphone-based programming with the B-LINK™ 2 Bluetooth Interface (sold separately) and free Castle Link 2 app available on Google Play or Apple App Store.
  • Mounting holes located in bottom of aluminum case for installation into vehicle. 

Additional Ghost RC specific features include: 

  • Upgraded 8 Gauge battery wires
  • Enhanced Start Power 
    • Increased tune-ability on how much power the ESC gives the motor to get off the line and out of the prep
    • Start Power Ramp Time - Allows users to adjust how quickly the start power ramps in on launch
    • Start Power Hold Time - Sets how long it holds the start power before moving into boost timing or programmed throttle mode
  • RPM Limiter
    • Allows users to set a maximum motor RPM, reducing rotor failures if driveline components fail.
  • Boost Timing
    • Increases motor timing up to 120° total timing (sensors required)
    • RPM Based or Throttle Percentage based modes
    • Turbo Timing
      • Additional timing that activates after Boost Timing, up to 120° total.
      • Adjustable activation point based on throttle percentage
      • Tunable rate of acceleration based on degrees per second.
    • Programmed Throttle Curve
      • Allows users to set a throttle curve that automatically engages at launch
      • Time based activation that engages at an adjustable throttle input
Ghost RC Cobra 8 Technical Specs
Input Voltage Range:

Min: 2s LiPo

Max: 4s LiPo (16.8V)

BEC Specifications:

5.0V - 8.0V adjustable in 0.1V increments (8A peak), default 5.5V

Application Guidelines:

Intended for 1/10th scale No Prep Drag Racing.

Running Modes:

SmartSense™ Brushless, Sensored Only, Brushed

Brake:

Proportional

Reversible:

Yes, but may be disabled for racing.

On/Off Switch:

Yes, waterproof

Cooling Fan:

Optional, 011-0137-00

Size (L x W x H):

2.36" x 2.04" x 1.69" (60mm x 52mm x 43mm)

Weight (with no battery connector):

5.84 oz (165.6 grams)

Connectors:

6.5mm female bullets for motor connection, matching 6.5mm male bullets included with motor.

Items Needed for Operation:

A high current connector designed for high-powered electric systems, rated for 120+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors, soldered to the battery leads.

Programmability:

Fully programmable Castle feature set using the included FREE Castle Link V4 USB adapter and freely downloadable NEW Castle Link Windows™ software. (Windows 10+ required)

Operation Environment:

Waterproof* design allows for use in nearly any environment.

Telemetry Link Capable: Not supported
Product Use Statement:

Castle Creations does not provide technical support or service on Ghost RC products. Please contact Ghost RC for any questions regarding their products.

An external capacitor pack must be used with the Ghost RC Cobra 8 ACE. Failure to use an external capacitor pack will affect ESC performance and can lead to damage.

WARNING: This product is for advanced users in drag racing applications. Due to the aggressive and abusive nature of drag racing, this product is sold with no warranty.

Castle Link Mobile App:

B-Link 2, 011-0181-00



Additional Features:

Input Voltage Range 6.0v - 16.8v (2s - 4s LiPo)

Waterproof design for all weather conditions

SmartSense™, Sensored Only and Brushed Motor Operation Modes

Data logging capability to capture and record performance data from your vehicle

Powerful Integrated 8A Peak Adjustable BEC (5.00V - 8.0V)

Auxiliary wire functionality for "on-the-fly" adjustments using your transmitter

CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs

Audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff

ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to protect the electronics and promote efficient heat transfer

Convenient transmitter programming for six common adjustable settings including cutoff voltage and drag brake

Premium forged heatsink with elliptical fins for superior air flow and increased heat dissipation

Includes Castle Link V4 USB adapter for Windows


Resources:

Cobra 8 ACE User Guide Cobra 8 Quick Start Guide Sensored Motor Quick Start Guide
1/8th Scale ESC Comparison Audible Alert Reference Cobra 8 Mounting Template


Optional Accessories:

Castle Link Quick Connect (010-0079-00) B-Link 2 Bluetooth Interface (011-0181-00) 6.5mm Polarized Connectors, M/F (011-0053-00)
6.5mm Polarized Connector, M (011-0068-00) Polarized Castle Connectors, 6.5mm F (011-0069-00) CC Bullet 6.5mm, M/F
CC Bullet 8mm, M/F Motor Cooling Fan (011-0153-00) Castle Capacitor Pack, 8s (35V) (011-0148-00)
250mm Direct Sensor Wire (011-0146-00)


Service Parts:

Replacement Top Case and Fan Shroud (011-0182-00) Replacement Receiver Harness (011-0106-00) Replacement ESC Cooling Fan (011-0137-00)


Castle Creations warrants this product to be free from manufacturing defects for a period of one year from date of purchase.

This product may contain chemicals known to the State of California to cause cancer and or birth defects or other reproductive harm.

Product designed in Olathe, Kansas USA.

Related products