CASTLE WILL BE CLOSED ON NOV. 26 AND 27 IN OBSERVANCE OF THE THANKSGIVING HOLIDAY

Cart (0 Products )

My Cart

Receiver Harness Replacement - Mamba Micro X
Press and move to zoom
Mouse over image to zoom

Receiver Harness Replacement - Mamba Micro X

Product #: 011-0105-00

UPC code:819326011016

Replacement Receiver Harness for the Mamba Micro X ESC.

Features:

  • Correct factory-specified connectors (RX and AUX)
  • Waterproof switch
  • Factory-specified wire gauge
USD $5.95 /EA
List Price: USD $7.95 /EA
Bookmark and Share
    • EA
  • Availability: This item is in stock.

Mamba Micro X Receiver Harness Connection Instructions

To Remove The Receiver Harness:

  1. Place slight outward pressure with thumb on the retaining clip (Figure 1).
  2. Grip the harness close to the 6 pin connector and pull gently, at a slight angle towards the ESC, to remove the harness from the ESC pin header (Figure 2).

    Note: Do not yank or forcefully pull harness out of ESC. May cause damage to ESC or harness.

To Replace The Receiver Harness:

  1. Place slight outward pressure with thumb on the retaining clip (Figure 1).
  2. Following the color coded wiring diagram provided on the Mamba Micro X label, place the 6 pin connector into the ESC pin header (Figure 3).

    Note: The harness must be plugged into the pin headers furthest from the ESC/input capacitors. Misalignment of the harness will prevent the ESC from operating. Be sure that the brown wire is plugged in next to the negative (-) black power wire.
  3. Gently press on the 6 pin connector to fully engage with the ESC pin header, a slight click should be heard when secured. You may need to use a flat head screw driver or tweezers to ensure the connector snaps into place.

Castle Creations, Inc. warrants this product to be free from manufacturing defects for a period of one year from date of purchase.

This product may contain chemicals known to the State of California to cause cancer and or birth defects or other reproductive harm.

Product designed in Olathe, Kansas USA.
Product made in China.

Average rating:
Rate this product:

Recently Viewed

MAMBA MONSTER X 8S, 33.6V ESC W / 1717-1650KV
  • USD $359.95 /EA
  • List Price USD $438.95 /EA
END CAP REPLACEMENT KIT ICE 40HV  /  ICE 50
  • USD $5.99 /EA
  • List Price USD $12.99 /EA
PHOENIX EDGE LITE 50 AMP ESC, 8S / 34V WITH 5 AMP BEC
  • USD $84.95 /EA
  • List Price USD $104.95 /EA