AIR ESC: TALON 60, 6S / 25.2V, 60 AMP ESC w/ 20 AMP BEC
AIR ESC: TALON 60, 6S / 25.2V, 60 AMP ESC w/ 20 AMP BEC
The Talon 60 is well suited for SMALL SCALE OR AEROBATIC HELIS ranging from 360-450 size requiring up to 1400 watts on 6S. This ESC offers Castle’s industry-leading helicopter functions, such as the remarkable direct entry governor mode. Simply type in the desired RPM using a Castle Link USB adapter (redeemable coupon enclosed with purchase) and the free Castle Link Programming Suite running on a Windows ™ PC.
The compact layout and slim profile of the Talon 60 is also perfect for SCALE, SPORT and AEROBATIC PLANES in the .32 - .60 range requiring up to 1400 watts on 6S. Mounting the Talon 60 is simple and stress-free in any setup.
The Talon series ESCs are known for sporting heavy-duty BEC’s designed for today’s servos. The Talon 60 is no exception. With its 20 AMP PEAK POWER and 8 AMPS OF CONTINUOUS POWER, it will keep even the most draining servos at ease.
| Telemetry Capable: Yes |
| ESC Current Rating: 60 |
| Data Logging: No |
| Auxiliary Wire: No |
| Internal BEC: Yes |
| Minimum Input Voltage: 2S |
| Maximum Input Voltage: 6S |
Technical Specs
| Input Voltage Range: Min: 2S LiPo, Max: 6S LiPo |
| Max Continuous Amperage at Full Throttle: 60 amps* |
| Max Voltage: 25.2V |
| BEC Voltage: User selectable choice of 6 or 8 volt output (default is 6V). |
|
BEC Output: 20 amp peak** 8 amp continuous (always check servo draw prior to first flight) |
|
Size: Width: 1.19 (30.2mm) Length: 2.56" (65mm) Depth: 0.41" (10.6mm) |
|
Weight: 2.05 oz. (57g) - with wires, 1.09 oz. (30.9g) - without wires |
|
Connectors: N/A |
|
Application Guidelines: SMALL SCALE OR AEROBATIC HELIS ranging from 360-450 size requiring up to 1400 watts on 6S and SCALE, SPORT and AEROBATIC PLANES in the .32 -. 60 range requiring up to 1400 watts on 6S. |
| Items Needed for Operation: Battery Connectors (sold separately) and Motor Controllers (sold separately) |
|
Product Use Statements: N/A |
|
Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Castle Link adapter included in package) and freely downloadable Castle Link Windows software. |
| Telemetry Link Capable: Yes |
| Tech Notes: Units made on or after October 2025 require Castle Link 2 software. |
*RC HOBBY APPLICATION RATING: 60 amps for the duration of a single 10,000 mAh battery pack with the ESC in contact with a 5 mph airflow of 25C (77F) or cooler air. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and may shorten the life of the ESC. Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESC’s operating temperature.
**Peak indicates amperage sustainable for 0.5 seconds - long enough for most servos' current draw transients. Always confirm servo servo current draw before the first flight of the model.
Product Features
| Power System Alerts: The Talon ESCs are programmed to sound a number of tunes and codes using the motor as well as flashing LED patterns to alert users to certain conditions regarding their power system, such as over temperature, excessive load and locked head speed. |
| Telemetry Capable: Telemetry has the potential not only to improve the safety of our models by monitoring battery voltages, ESC temperature, and other critical parameters, but it also creates other opportunities to get even more fun out of flying because you’ve essentially reduced the risks of “unknown” inevitable crashes. Think of the benefits to be had from alarms that will sound to warn you when there's interference about or if your receiver battery is running unexpectedly low. Requires purchase of Castle Telemetry Link for S.BUS2 (Item # 010-0152-00) and compatible Futaba Radio or Castle Telemetry Link for X-BUS (Item# 010-0148-00) and a compatible Spektrum Radio. |
|
Firmware Upgrade: Users will receive free access to all firmware updates, including added features sets using the Castle Link USB Programming Kit. Note: Units made on or after October 2025 require Castle Link 2 software. |
| Castle Link Compatible: With the Castle Link USB Programming Kit you can use your Windows™ PC to easily program your controller. Castle Link includes all code for all Castle Link compatible hobby products in one convenient download. Note: Castle Link software requires a Castle Link USB Adapter and a computer that is running Windows. Castle Link is compatible with Windows Vista, Windows 7, Windows 8 and Windows 10.Macintosh users may take advantage of software such as Parallels Desktop, VMware Fusion, or Apple's Boot Camp along with Windows Vista, Windows 7, Windows 8, or Windows10 to run the Castle Link software, provided the Macintosh has an Intel processor. Macintosh installation is not supported by Castle Creations. |
Additional Castle Link Benefits Include:
|
U.S. Patent # 7400103, 7492122, 7579796, 7740516, 8287328, 8678875, and 8905814 B2 - Other patents pending.
Resources
Talon / Talon HV Castle Link Settings Overview
Castle Creations warrants this product to be free from manufacturing defects for a period of one year from date of purchase.
This product may contain chemicals known to the State of California to cause cancer and or birth defects or other reproductive harm.
Product designed in Olathe, Kansas USA.