FREE SHIPPING - USE COUPON CODE FREESHIP
PLEASE NOTE THAT SHIPPING TRANSIT TIMES ARE TAKING LONGER THAN EXPECTED AT THIS TIME

Cart (0 Products )

My Cart

MAMBA MICRO X 12.6V ESC, 2A PEAK BEC W /  POSTS
Press and move to zoom
Mouse over image to zoom

MAMBA MICRO X 12.6V ESC, 2A PEAK BEC W / POSTS

Product #: 010-0162-00




Putting the X in Extreme!

The Mamba Micro X Crawler edition ESC is our latest offering for the crawling crowd. This ESC is ideal for the weight conscious builder or where space is limited, used in low speed crawling or trail running in vehicles weighing up to 8lbs on 2s or 3s; it can also be used in slightly more aggressive setups like rock racing and extended hill climbing on vehicles up to 4lbs. Recommended motors include Castle's "Slate" crawler motors (combos available) and Holmes Hobbies Puller Pro 540 "Stubby" (≤ 2700kv)

If you're looking for a more aggressive setup in a heavier rig, like rock racing and extended hill climbing, we recommend you run the Mamba X ESC. Your ESC will come with our new V2.02 firmware that has been enhanced for rock crawling and sensored operation.

Note: Use of an external BEC is required if running a high power or digital servo.

This SPECIAL EDITION of the Mamba Micro X includes motor solder posts with 16 AWG wire and 4mm female bullets for the motor connection; 4mm male bullets sold separately.

The Auxiliary Advantage.
Mamba Micro X features the addition of a new, programmable Auxiliary Wire that allows you to make “on-the-go” adjustments to several settings such as torque control, and max throttle, and fine-tune the performance of your ESC right from the transmitter using an auxiliary channel on the receiver. The AUX wire function is disabled by default but is programmable via Castle Link. Once you have programmed the functionality of the AUX wire, that setting can then be adjusted on-the-go from a compatible transmitter. Try out the brand new Crawler Mode for incredible versatility!

Telemetry Capability
The Mamba Micro X is telemetry ready, which means owners of Futaba T4PX or 7PX Transmitters will be able to purchase the Castle Telemetry Link for S.BUS2. Real-time data such as ESC temperature, voltages, and RPM can be monitored to ensure performance advantages and spare you the “unknown” parameters that all R/C enthusiasts experience at some point. Telemetry data provides another level of protection and can increase performance.

Castle Link Compatible
With the optional Castle Link USB Programming Kit you can use your Windows™ PC to easily program your controller. Adjustable settings include:

  • Throttle curve
  • Braking curve
  • Drag brake
  • Auto LiPo cutoff
  • Punch Control
  • Reverse Type
  • Motor Type

 Additional Castle Link benefits include:

  • Access to all firmware updates, including added features sets released from Castle Engineering, at no charge.
  • Intuitive Demo Mode capability.
  • Ability to save setup profiles for later use.

    Package Includes:



    USD $79.95 /EA
    List Price: USD $97.95 /EA
    Bookmark and Share
    • Waterproof : Yes
    • Telemetry Capable : Yes
    • Data Logging : No
    • Auxiliary Wire : Yes
    • Minimum Input Voltage : 2S
    • Maximum Input Voltage : 3S
    • Sensored Capable : Yes
    • Recon G6 Certified ESC : No
    • ROAR Certified ESC : No
      • EA
    • Availability: This item is out of stock and will ship when available.
    Technical Specs
    Electronic Speed Control (ESC)
    Input Voltage Range: MIN: 2S LiPo
    MAX: 3S LiPo (12.6V)
    BEC Specifications: Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V. Use of external BEC is recommended if using a high torque/speed digital servo; the CC BEC or CC BEC 2.0 Waterproof are recommended
    Operating Environment: Waterproof* design allows for use in nearly any environment.
    Brake: Proportional
    Reversible: Yes, but can be disabled for racing
    On/Off Switch: Yes, waterproof*
    Cooling Fan: No
    Size: Length: 1.6" (41mm)
    Width: 0.75" (19mm)
    Height: 1.1" (28mm)
    Weight (without wires): 1.20 oz. (34g)
    Connectors: 4mm female Castle Bullet Connectors (males sold separately) attached to replaceable 16 gauge wire; includes Castle sensor harness.
    Items Needed for Operation: Battery Connector required, Castle 4mm polarized Connectors, Deans Ultra Plugs, or Traxxas Power Connect are recommended. 4mm male bullets for motor connection.
    Product Use Statements:
    • Applying voltages higher than 12.6 volts will cause irreparable damage to your controller, voiding your warranty.
    • Recommended battery capacity is at least 1500mAh and 25C. Castle recommends running the highest mAh that will fit in your vehicle and the highest C rating you can afford.
    • The Crawler Edition Mamba Micro X has solder posts for the motor connections; includes 13 gauge wire with 4mm female bullets that connect directly to the included 1406-1900kv motors and the battery input wires are bare. You must solder the connector to the wires on the ESC. See Items Needed for Operation for recommendations.
    Application Guidelines: Low speed crawling or trail running in vehicles weighing up to 8lbs. If you're looking for a more aggressive setup, like rock racing and extended hill climbing it is recommend to run the Mamba X ESC with the same motor.
    Recommended Motors: Castle's "Slate" crawler motors (combos available) and Holmes Hobbies Puller Pro 540 "Stubby" (≤ 2700kv)
    Max. Recommended Vehicle Weight: 8lbs when used for low speed/moderate driving style; 4lbs for more aggressive driving styles.
    Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software.
    Telemetry Link Capable: Yes
    Tech Notes: *Although the Mamba Micro X Crawler Edition is waterproof, it is not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC with clean water after exposure to corrosives or dirt. While the controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.
    Resources
    Mamba Micro X Driver's Guide Mamba Micro X Quick Start Guide Sensored Motor Quick Start

    For support, frequently asked questions, technical documents, and more, visit our support site.

    Castle Creations, Inc. warrants this product to be free from manufacturing defects for a period of one year from date of purchase.

    This is a high power product with the potential to be very dangerous. Please read the safety information before use. This product may contain chemicals known to the State of California to cause cancer and or birth defects or other reproductive harm.

    U.S. Patent # 7400103, 7492122, 7579796, 7740516, 8287328, 8678875, and 8905814 B2 - Other patents pending.

    Controller designed, and circuit boards manufactured, in Olathe, Kansas USA.
    Controller assembled in Olathe, KS. USA



    Average rating:
    (Based on 1 vote(s))
    Rate this product:

    Recently Viewed

    PHOENIX EDGE LITE 200 AMP ESC, 8S / 34V WITH 5 AMP BEC
    • USD $294.95 /EA
    • List Price USD $359.95 /EA
    Castle Link V3 USB Programming Kit
    • USD $19.95 /EA
    • List Price USD $24.95 /EA
    Polarized Castle Connectors - 4.0mm Male / Female Set
    • USD $5.50 /EA
    • List Price USD $6.95 /EA
    You may also be interested in
    B-Link Bluetooth Adapter
    • USD $49.95 /EA
    • List Price USD $60.95 /EA
    • Qty
    CC BEC 2.0 Waterproof Voltage Regulator
    • USD $44.95 /EA
    • List Price USD $54.95 /EA
    • Qty
    Servo Direct Connect
    • USD $6.95 /EA
    • List Price USD $8.95 /EA
    • Qty