Mamba Micro X Extreme 1:18 Scale Combo with 0808-8200Kv Motor
Product #: 010-0147-03
UPC code:819326011078
The Mamba Micro X has been discontinued. It has been replaced by the improved Mamba Micro X2. This page is for informational purposes only.
Putting the X in Extreme!Mamba Micro X is our latest 1:18 scale controller capable of 2S - 3S LiPo (2s max with included 0808 8200kv), with an 2 amp peak BEC - and, it’s waterproof*, so you can run your vehicle through morning dew, across soggy snow, or a muddy trail. This is the perfect upgrade for 2WD or 4WD vehicles over 1.5 lbs and up to 2.25 lbs (1.75lb max with included 0808-8200kv motor)
Not intended for 1/16th scale or 1/14th scale vehicles (IE Losi Mini-8ight/T, Traxxas Mini E-Revo
The Auxiliary Advantage.
Mamba Micro X features the addition of a new, programmable Auxiliary Wire that allows you to make “on-the-go” adjustments to several settings such as torque control, and max throttle, and fine-tune the performance of your ESC right from the transmitter using an auxiliary channel on the receiver. The AUX wire function is disabled by default but is programmable via Castle Link. Once you have programmed the functionality of the AUX wire, that setting can then be adjusted on-the-go from a compatible transmitter. Mamba Micro X also features updated Audible Alerts that will notify you of possible issues with calibrations and error conditions to help diagnose problems in the field.
Telemetry Capability
The Mamba Micro X is telemetry ready, which means owners of Futaba T4PX
Transmitters will be able to purchase the Castle Telemetry Link for S.BUS2. Real-time data such as ESC temperature, voltages, and
RPM can be monitored to ensure performance advantages and spare you the
“unknown” parameters that all R/C enthusiasts experience at some point.
Telemetry data provides another level of protection and can increase
performance.
Mighty Mini Combination
This combo includes the Mamba Micro X controller and our lightweight, yet powerful, 0808-8200Kv motor.
*Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.
| Technical Specs | |
|---|---|
| Controller | |
| Input Voltage Range: | MIN: 2S LiPo MAX: 3S LiPo (12.6V) (8200kv motor rated for 2s LiPo/7 cell NiMH Max) |
| BEC Specifications: | Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V |
| Operating Environment: | Waterproof* design allows for use in nearly any environment. |
| Brake: | Proportional |
| Reversible: | Yes, but may be disabled for racing |
| On/Off Switch: | Yes, waterproof |
| Cooling Fan: | No |
| Size: | Length: 1.6" (41mm) Width: 0.75" (19mm) Height: 1.1" (28mm) |
| Weight (without wires): | 1.20 oz. (34g) |
| Connectors: | 3.5mm bullets |
| Items Needed for Operation: | Battery Connector required, 4mm Castle Connectors are recommended. |
| Product Use Statements: |
|
| Application Guidelines: | 1:18 scale RC hobby vehicles weighing up to 1.5lbs. Not intended for 1/16th scale or 1/14th scale vehicles (IE Losi Mini-8ight/T, Traxxas Mini E-Revo |
| Recommended Motors: | Combo includes Castle 0808 8200Kv: Max Cells: 2S Lipo or 8 NiMH |
| Max. Recommended Vehicle Weight: | 1.5 lbs, with batteries, ready-to-run |
| Programmability: | Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software. |
| Telemetry Link Capable: | Yes |
| Tech Notes: | N/A |
| Motor | |
| Input Voltage Range: | 2S LiPo max (for 8200Kv motor) |
| Kv: | 8200 |
| Max. RPM: | N/A |
| Motor Size: | Length: 1.5" (38.1mm) Diameter: 0.79" (20mm) |
| Shaft Size: | Diameter: 0.08" (2mm) Length: 12mm |
| Weight (w/wires): | 1.8 oz. (50g) |
| Mounting Hole Specifications: | 2.5mm holes @ 1/2”, 14MM, 5/8” |
| Cooling Fan: | No |
| Connectors: | 3.5mm male bullets |
| Items Needed for Operation: | N/A |
| Product Use Statements: | Max operating temperature: 180F (82C) |
| Application Guidelines: | Up to 2S LiPo and weighing in at up to 1.5lbs. |
| Max. Recommended Vehicle Weight: | 1.5lbs |
| Tech Notes: | Monitor motor temperatures closely; overheating a motor will cause
permanent damage to the magnets. Never exceed 180° F on the the motor or
ESC. |
| Resources | ||
|---|---|---|
| Mamba Micro X Driver's Guide | Mamba Micro X Quick Start Guide | 0808 Gearing chart |
Castle Creations, Inc. warrants this product to be free from manufacturing defects for a period of one year from date of purchase.
This is a high power product with the potential to be very dangerous. Please read the safety information before use. This product may contain chemicals known to the State of California to cause cancer and or birth defects or other reproductive harm.
U.S. Patent # 7400103, 7492122, 7579796, 7740516, 8287328, 8678875, and 8905814 B2 - Other patents pending.
Controller designed, and circuit boards manufactured, in Olathe, Kansas USA.
Controller assembled in Mexico.
Castle Link Compatible
With the Castle Link USB Programming Kit you can use your Windows™ PC to easily program your controller. Adjustable settings include:
- Throttle
- Braking curve
- Drag brake
- Auto LiPo cutoff
- Punch Control
- Reverse Type
- Motor Type
Additional Castle Link benefits include:
- Access to all firmware updates, including added features sets released from Castle Engineering, at no charge.
- Intuitive Demo Mode capability
- Ability to save setup profiles for later use
