Cart (0 Products )

My Cart

Press and move to zoom
Mouse over image to zoom

Mamba Micro X Extreme 1:18 Scale Combo with 0808-4100Kv Motor

Product #: 010-0147-01

UPC code:819326011054

The Mamba Micro X has been discontinued. It has been replaced by the improved Mamba Micro X2.

Putting the X in Extreme!

Mamba Micro X is our latest 1:18 scale controller capable of 2S - 3S LiPo, with an 2 amp peak BEC - and, it’s waterproof*, so you can run your vehicle through morning dew, across soggy snow, or a muddy trail. This is the perfect upgrade for 2WD or 4WD vehicles up to 2.25 lbs.
Not intended for 1/16th scale or 1/14th scale vehicles (IE Losi Mini-8ight/T, Traxxas Mini E-Revo)

Mighty Mini Combination

This combo includes the Mamba Micro X controller and our lightweight, yet powerful, 0808-4100Kv motor.

Mamba Micro X  Combo Purchase Includes:
  • Mamba Micro X ESC
  • 0808-4100kV Sensorless Brushless Motor
  • Coupon for free Castle Link USB adapter
  • Driver's Ed and Quick Start Guide
  • Castle Decals
*Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.
Mamba Micro X Quick Start
Mamba Micro X Drivers Ed Guide
0808 Motor Gearing Chart
 Mamba Micro X FAQ
Audible Alert Reference Chart

  • USD $124.95 /EA
  • List Price: USD $152.95 /EA
Bookmark and Share
Code Availability Quantity
010-0147-01 Discontinued
Technical Specs
Input Voltage Range: MIN: 2S LiPo
MAX: 3S LiPo (12.6V)
BEC Specifications: Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V
Operating Environment: Waterproof* design allows for use in nearly any environment.
Brake: Proportional
Reversible: Yes, but can be disabled for racing
On/Off Switch: Yes, waterproof
Cooling Fan: No
Size: Length: 1.6" (41mm)
Width: 0.75" (19mm)
Height: 1.1" (28mm)
Weight (without wires): 1.20 oz. (34g)
Connectors: 3.5mm bullets
Items Needed for Operation: Battery Connector required, 4mm Castle Connectors are recommended.
Product Use Statements:
  • Applying voltages higher than 12.6 volts will cause irreparable damage to your controller, voiding your warranty.
  • Recommended battery capacity for 1:18 scale vehicles is 1500mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell).
  • Mamba Micro X has 3.5mm bullet connectors on the motor wires and the battery input wires are bare. You must add the connector of your choice to the battery leads. We recommend a high current connector rated for at least 40 amps.
Application Guidelines: 1:18 scale RC hobby vehicles weighing up to 2.25lbs.
Not intended for 1/16th scale or 1/14th scale vehicles (IE Losi Mini-8ight/T, Traxxas Mini E-Revo)
Recommended Motors: Combo includes Castle 0808 4100Kv: Max Cells: 3S Lipo or 8 NiMH
Max. Recommended Vehicle Weight: 2.25 lbs, with batteries, ready-to-run
Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software.
Telemetry Link Capable: Yes
Tech Notes: N/A
Input Voltage Range: 2S - 3S LiPo
Kv: 4100
Max. RPM: N/A
Motor Size: Length: 1.5" (38.1mm)
Diameter: 0.79" (20mm)
Shaft Size: Diameter: 0.08" (2mm)
Length: 12mm
Weight (w/wires): 1.8 oz. (50g)
Mounting Hole Specifications: 2.5mm holes @ 1/2”, 14MM, 5/8”
Cooling Fan: No
Connectors: 3.5mm male bullets
Items Needed for Operation: N/A
Product Use Statements: Max operating temperature: 180F (82C)
Application Guidelines: N/A
Max. Recommended Vehicle Weight: 2.25lbs
Tech Notes: Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC.
Mamba Micro X Driver's Guide Mamba Micro X Quick Start Guide 0808 Gearing chart

For support, frequently asked questions, technical documents, and more, visit our support site.

Castle Creations, Inc. warrants this product to be free from manufacturing defects for a period of one year from date of purchase.

This is a high power product with the potential to be very dangerous. Please read the safety information before use. This product may contain chemicals known to the State of California to cause cancer and or birth defects or other reproductive harm.

U.S. Patent # 7400103, 7492122, 7579796, 7740516, 8287328, 8678875, and 8905814 B2 - Other patents pending.

Controller designed, and circuit boards manufactured, in Olathe, Kansas USA.
Controller assembled in Olathe, KS. USA

Castle Link Compatible
With the optional Castle Link USB Programming Kit you can use your Windows™ PC to easily program your controller. Adjustable settings include:

  • Throttle curve
  • Braking curve
  • Drag brake
  • Auto LiPo cutoff
  • Punch Control
  • Reverse Type
  • Motor Type

Additional Castle Link benefits include:

  • Access to all firmware updates, including added features sets released from Castle Engineering, at no charge.
  • Intuitive Demo Mode capability.
  • Ability to save setup profiles for later use.
  • Ability to default ESC to factory settings.
  • Ability to download and view data logs (on applicable controllers).

Average rating:
(Based on 21 vote(s))
Rate this product:

You may also be interested in

Polarized Castle Connectors - 4.0mm Female Multi-Pack
  • USD $10.95 /EA
  • List Price USD $13.95 /EA
  • Qty
Castle Link V3 USB Programming Kit
  • USD $21.95 /EA
  • List Price USD $26.95 /EA
  • Qty
Polarized Castle Connectors - 4.0mm Male / Female Set
  • USD $6.50 /EA
  • List Price USD $7.95 /EA
  • Qty

Recently Viewed

  • USD $99.95 /EA
  • List Price USD $121.95 /EA