SENSORED MOTOR: 4-POLE SENSORED BRUSHLESS 1515-2200KV 12WG, 4MM V2 MOTOR

SENSORED MOTOR: 4-POLE SENSORED BRUSHLESS 1515-2200KV 12WG, 4MM V2 MOTOR

$189.95
Skip to product information
SENSORED MOTOR: 4-POLE SENSORED BRUSHLESS 1515-2200KV 12WG, 4MM V2 MOTOR
SENSORED MOTOR: 4-POLE SENSORED BRUSHLESS 1515-2200KV 12WG, 4MM V2 MOTOR

SENSORED MOTOR: 4-POLE SENSORED BRUSHLESS 1515-2200KV 12WG, 4MM V2 MOTOR

060-0110-00
$189.95

Our commitment to excellence drives us to refine the user experience, optimize performance, and ensure that every aspect of our products is meticulously designed to provide the utmost satisfaction. Let's face it, even the best products have room for refinement, which is why we are excited to introduce the newly redesigned 1515-2200Kv V2, a new spin on one of the most popular motors we have ever produced! The rotor and stator have been completely redesigned to improve magnetic flux. This results in higher efficiency, smoother start-up, reduced temperatures, and longer run times!

 

Minimum Input Voltage: 2s
Maximum Input Voltage: 4s
Sensored Capable: Yes
Recon G6 Certified Motor: No
ROAR Certified Motor: No

 

1515-2200Kv V2 Features:

  • Input Voltage range: 2s-6s LiPo (4s max with Mamba X or Cobra 10)
  • Redesigned rotor and stator assemblies.
  • Reduced magnetic cogging, producing less residual drag brake.
  • Increased efficiency, resulting in lower temperatures and longer run times.
  • Smoother start-up, reducing cogging or stuttering when starting from a stop.
  • Rebuildable design allows replacement of front end bell/bearing assembly or rotor/shaft assembly.
  • High-Strength Kevlar Wrap and 180C Grade Neodymium Sintered Magnets
  • Oversized NMB Bearings and High-Temperature, High-Purity Copper Windings 
  • Castle 10 AWG, High-Strand-Count Silicone-Insulated Wire with 6.5mm Bullet Connectors
  • High-Performance 0.2mm Steel Lamination Stacked Stator
  • Oversized, low-resistance, gold-plated solder tabs
  • Sensor board with High Quality Temperature-Stabilized Sensors
  • T6 Aluminum CNC Machines Front/Rear End bell
  • Proudly Designed and Supported in Kansas, USA.
  • Backed by Castle Creations' 1-YEAR WARRANTY

 

Technical Specs

Input Voltage Range: 2s - 6s LiPo (4s max when paired with Mamba X or Cobra 10 ESCs)
Kv: 2200
Max RPM: 60,000
Size: Length: 75.4mm
Diameter: 40mm (41.1mm with fins)
Weight (w/wires):

15.1oz / 426g (380g without wires)
Shaft Size: Length: 20mm
Diameter: 5mm
Mounting Hole Specs: M3 and M4 @ 25mm
Cooling Fan: Optional, 011-0139-00
Connectors: 6.5mm male Castle Bullet Connectors, includes 210mm length sensor wire.
Items Needed for Operation: Compatible Electronic Speed Control (ESC)
Application Guidelines: Ideal for 1:8 scale Off-Road buggies weighing up to 9 lbs.
Recommended ESCs: Mamba X, Cobra 10
Tech Tips: Running modes: SmartSense™ Sensored and an ultra-efficient Sensorless mode

Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to instructions for running and maintaining motors in wet environments.

 

Resources

Replacement Rotor: 011-0166-00

Sensored Motor Quick Start Guide

Maintaining Motors in Wet Conditions

Castle Creations warrants this product to be free from manufacturing defects for a period of one year from date of purchase.

This product may contain chemicals known to the State of California to cause cancer and or birth defects or other reproductive harm.

Product designed in Olathe, Kansas USA.

Related products