CASTLE WILL BE CLOSED ON DECEMBER 3RD AND 4TH FOR OUTBOUND SHIPMENTS DUE TO PHYSICAL INVENTORY

Cart (0 Products )

My Cart

Mamba Micro X Extreme 1:18 Scale Combo with 0808-8200Kv Motor
Press and move to zoom
Mouse over image to zoom

Mamba Micro X Extreme 1:18 Scale Combo with 0808-8200Kv Motor

Product #: 010-0147-03

UPC code:819326011078

Putting the X in Extreme!

Mamba Micro X is our latest 1:18 scale controller capable of 2S - 3S LiPo (2s max with included 0808 8200kv), with an 2 amp peak BEC - and, it’s waterproof*, so you can run your vehicle through morning dew, across soggy snow, or a muddy trail. This is the perfect upgrade for 2WD or 4WD vehicles over 1.5 lbs and up to 2.25 lbs.
Not intended for 1/16th scale or 1/14th scale vehicles (IE Losi Mini-8ight/T, Traxxas Mini E-Revo

The Auxiliary Advantage.
Mamba Micro X features the addition of a new, programmable Auxiliary Wire that allows you to make “on-the-go” adjustments to several settings such as torque control, and max throttle, and fine-tune the performance of your ESC right from the transmitter using an auxiliary channel on the receiver. The AUX wire function is disabled by default but is programmable via Castle Link. Once you have programmed the functionality of the AUX wire, that setting can then be adjusted on-the-go from a compatible transmitter. Mamba Micro X also features updated Audible Alerts that will notify you of possible issues with calibrations and error conditions to help diagnose problems in the field.

Sensored Motor Capable (with optional Sensor Harness)
Mamba Micro X can also be configured to run sensored brushless motors with the purchase of an optional Sensor Harness. This sensored-motor capability opens up a whole new segment of R/C enthusiasts who will now get to experience the power, control, and fun of a Castle power system.

Telemetry Capability
The Mamba Micro X is telemetry ready, which means owners of Futaba T4PX Transmitters will be able to purchase the Castle Telemetry Link for S.BUS2. Real-time data such as ESC temperature, voltages, and RPM can be monitored to ensure performance advantages and spare you the “unknown” parameters that all R/C enthusiasts experience at some point. Telemetry data provides another level of protection and can increase performance.

Mighty Mini Combination
This combo includes the Mamba Micro X controller and our lightweight, yet powerful, 0808-8200Kv motor.

*Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.

USD $104.95 /EA
List Price: USD $127.95 /EA
Bookmark and Share
  • Waterproof : Yes
  • Telemetry Capable : Yes
  • Data Logging : No
  • Auxiliary Wire : Yes
  • Minimum Input Voltage : 2S
  • Maximum Input Voltage : 2S
  • Sensored Capable : No
  • Recon G6 Certified ESC : No
  • ROAR Certified ESC : No
    • EA
  • Availability: This item is out of stock and will ship when available.
Technical Specs
Controller
Input Voltage Range: MIN: 2S LiPo
MAX: 3S LiPo (12.6V) (8200kv motor rated for 2s LiPo/7 cell NiMH Max)
BEC Specifications: Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V
Operating Environment: Waterproof* design allows for use in nearly any environment.
Brake: Proportional
Reversible: Yes, but may be disabled for racing
On/Off Switch: Yes, waterproof
Cooling Fan: No
Size: Length: 1.6" (41mm)
Width: 0.75" (19mm)
Height: 1.1" (28mm)
Weight (without wires): 1.20 oz. (34g)
Connectors: 3.5mm bullets
Items Needed for Operation: Battery Connector required, 4mm Castle Connectors are recommended.
Product Use Statements:
  • Applying voltages higher than 12.6 volts will cause irreparable damage to your controller, voiding your warranty.
  • Recommended battery capacity for 1:18 scale vehicles is 1500mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell).
  • Mamba Micro X has 3.5mm bullet connectors on the motor wires and the battery input wires are bare. You must add the connector of your choice to the battery leads. We recommend a high current connector rated for at least 40 amps.
Application Guidelines: 1:18 scale RC hobby vehicles weighing up to 1.5lbs.
Not intended for 1/16th scale or 1/14th scale vehicles (IE Losi Mini-8ight/T, Traxxas Mini E-Revo
Recommended Motors: Combo includes Castle 0808 8200Kv: Max Cells: 2S Lipo or 8 NiMH
Max. Recommended Vehicle Weight: 1.5 lbs, with batteries, ready-to-run
Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software.
Telemetry Link Capable: Yes
Tech Notes: N/A
Motor
Input Voltage Range: 2S LiPo max (for 8200Kv motor)
Kv: 8200
Max. RPM: N/A
Motor Size: Length: 1.5" (38.1mm)
Diameter: 0.79" (20mm)
Shaft Size: Diameter: 0.08" (2mm)
Length: 12mm
Weight (w/wires): 1.8 oz. (50g)
Mounting Hole Specifications: 2.5mm holes @ 1/2”, 14MM, 5/8”
Cooling Fan: No
Connectors: 3.5mm male bullets
Items Needed for Operation: N/A
Product Use Statements: Max operating temperature: 180F (82C)
Application Guidelines: Up to 2S LiPo and weighing in at up to 1.75lbs.
Max. Recommended Vehicle Weight: 1.75lbs
Tech Notes: Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC.
Resources
Mamba Micro X Driver's Guide Mamba Micro X Quick Start Guide 0808 Gearing chart

Castle Creations, Inc. warrants this product to be free from manufacturing defects for a period of one year from date of purchase.

This is a high power product with the potential to be very dangerous. Please read the safety information before use. This product may contain chemicals known to the State of California to cause cancer and or birth defects or other reproductive harm.

U.S. Patent # 7400103, 7492122, 7579796, 7740516, 8287328, 8678875, and 8905814 B2 - Other patents pending.

Controller designed, and circuit boards manufactured, in Olathe, Kansas USA.
Controller assembled in Mexico.

Castle Link Compatible
With the Castle Link USB Programming Kit you can use your Windows™ PC to easily program your controller. Adjustable settings include:

  • Throttle
  • Braking curve
  • Drag brake
  • Auto LiPo cutoff
  • Punch Control
  • Reverse Type
  • Motor Type

Additional Castle Link benefits include:

  • Access to all firmware updates, including added features sets released from Castle Engineering, at no charge.
  • Intuitive Demo Mode capability
  • Ability to save setup profiles for later use

Average rating:
(Based on 7 vote(s))
Rate this product:

Recently Viewed

Castle 1512 1.5Y Sensored Motor - 1800Kv
  • USD $154.95 /EA
  • List Price USD $188.95 /EA
Receiver Harness Replacement for Sidewinder 8th ESC
  • USD $5.95 /EA
  • List Price USD $7.95 /EA
TALON 15 AMP ESC, 4S / 16V WITH 8 AMP BEC
  • USD $34.95 /EA
  • List Price USD $42.95 /EA
Mamba Monster X Extreme 1:8 Scale ESC
  • USD $164.95 /EA
  • List Price USD $201.95 /EA
MAMBA X, SENSORED, 25.2V WP ESC AND 1406-2850KV SENSORED COMBO
  • USD $224.95 /EA
  • List Price USD $274.95 /EA
You may also be interested in
Field Link Portable Programmer for Driving
  • USD $29.95 /EA
  • List Price USD $36.95 /EA
  • Qty
B-Link Bluetooth Adapter
  • USD $49.95 /EA
  • List Price USD $60.95 /EA
  • Qty
Polarized Castle Connectors - 4.0mm Male Multi-Pack
  • USD $9.95 /EA
  • List Price USD $12.95 /EA
  • Qty