|
Support > Castle Link files for Align Helis > Settings for Align 700E/700MX 510KV
Castle Link Settings for Align 700E/700MX 530KV
Click here for a printable PDF of these settings.
| Throttle |
| Vehicle Type: |
Helicopter |
| Throttle Type: |
Governor Mode |
| Governor Gain: |
12 |
| Initial Spool Up Rate: |
5 |
| Head Speed Change Rate: |
18 |
| Auto Rotate Enabled: |
True |
| Governor Mode Type: |
Fixed |
| Vehicle Setup - Battery Type: |
LiPo |
| Vehicle Setup - Number of Cells: |
12 |
| Vehicle Setup - Battery Voltage: |
44.4000 |
| Vehicle Setup - Gear Ratio: |
9.583 |
| Vehicle Setup - Motor KV: |
530 |
| Vehicle Setup - Motor Number of Poles: |
10 |
| Desired Head Speed 1: |
1954 |
| Desired Head Speed 2: |
2000 |
| Desired Head Speed 3: |
2109 |
| Brake |
| |
|
| Cutoffs |
| Cutoff Voltage: |
Auto-LiPo (default) |
| Auto-Lipo Volts/Cell: |
3.0 Volts/Cell (default) |
| Current Limiting: |
Insensitive (180A) |
| Cutoff Type: |
Soft Cutoff |
| Motor |
| Motor Start Power: |
Medium (59) (default) |
| Motor Timing: |
Normal (5) (default) |
| Direction: |
Forward (default) |
| PWM Rate: |
8Khz |
| Other |
| Power-on Beep: |
Disabled |
| Logging |
| Data Log Enabled: |
255 |
| Sample Frequency: |
2 sample/sec (default) |
| Software |
| Device Name: |
Phoenix Ice HV 120 (F367) |
| Current Firmware: |
V 3.27 (Beta) |
|
