Products > Phoenix HV Brushless Motor Controls


Phoenix HV Brushless Speed Controls are ready to fly out of the package, but they are also fully programmable using our incredible Castle Link USB interface and software (sold separately). Users may configure their controller in a wide variety of settings including your choice of low voltage cutoff behavior, braking profiles, throttle reaction, and start power. A full range of helicopter governor settings is only a few clicks away.

  • PHOENIX HV-30
  • PHOENIX HV-45
  • PHOENIX HV-85
  • PHOENIX HV-110
  • PHOENIX HV-140
Phoenix HV-30 Brushless Motor Control

Meet the “baby” of the Phoenix HV line, complementing our reliable Phoenix HV-45, HV-85 and HV-110. Watch out, this baby sure packs a punch! Phoenix HV-30 easily handles 30 amps at up to 50 volts, that’s 1,500 watts in a package that is nearly the same size as the standard Phoenix-35 controller. Use Phoenix HV-30 anywhere high-power and light weight are critical.

We are sure that it will bring a whole new dimension of power and efficiency to electric aircraft.

Use voltage, not amps to get the power that you need. An HV setup allows use of lower capacity cells and lighter wire gauges. This is a perfect recipe for small high-performance applications such as racers or small helis OR long endurance applications such as AULD or small UAVs.

Phoenix HV-30 is going to help you turn some heads!

See the Phoenix User Guide (364k PDF) for more details.

All Phoenix HV speed controls feature:
  • Safe "Power On"
  • Microprocessor Controlled
  • Tough surface mount construction
  • Audible Arming Signal
  • Auto Motor cut-off with reset
  • Low torque "Soft Start": protects gear boxes and belt drives from shock
  • Smooth reverse exponential throttle
  • Self-calibrating endpoints: maximizes usable stick travel
  • Auto shut-down when signal is lost
  • Simple setup: no complicated switches or wiring
Specs
Part # 010-0034-00
Price DISCONTINUED
Max Input Voltage 50 volts
Max Amp Draw 30 amps
BEC None
Throttle RF Shielding Opto isolated throttle cable
Resistance 0.005 ohms
Castle Link Compatible Yes
Length 2" with capacitors (50mm)
Width 1" (25.4mm)
Height 0.5" (12.7mm)
Weight 1 oz with 4" wires (27 g)
Phoenix HV-45 Brushless Motor Control

The Phoenix HV-45 brings the awesome power of high voltage systems within the reach of almost any modeler. Don't let the amp rating fool you here - 45 amps and 50 volts adds up to over 2,000 watts of power! The Phoenix HV-45's compact size and light weight make high voltage systems a realistic possibility for even small field aircraft and small to medium sized helicopters. Use the Phoenix HV-45 in your next .40 size electric conversion and marvel at the extra power and runtime that high voltage systems are known for. Do you like large aircraft? We powered our own 11lb Funtana 90s "test" aircraft with a Phoenix HV-45 controller and a 12s Lipo battery pack for unlimited verticals and wild 3D maneuvers - electric has never been this fun as well as affordable!

See the Phoenix User Guide (364k PDF) for more details.

All Phoenix HV speed controls feature:
  • Safe "Power On"
  • Microprocessor Controlled
  • Tough surface mount construction
  • Audible Arming Signal
  • Auto Motor cut-off with reset
  • Low torque "Soft Start": protects gear boxes and belt drives from shock
  • Smooth reverse exponential throttle
  • Self-calibrating endpoints: maximizes usable stick travel
  • Auto shut-down when signal is lost
  • Simple setup: no complicated switches or wiring
Specs
Part # 010-0035-00
Price DISCONTINUED
Max Input Voltage 50 volts
Max Amp Draw 45 amps
BEC None
Throttle RF Shielding Opto isolated throttle cable
Resistance 0.003 ohms
Castle Link Compatible Yes
Length 2.6" (66.04mm)
Width 1.05" (26.67mm)
Height 0.5" (12.7mm)
Weight 1.9 oz. (59g)
Phoenix HV-85 Brushless Motor Control

The Phoenix HV-85 has the power handling capability for just about anything you can put into the sky! With a total ability of over 4,000 watts (that's 5 horsepower!), The Phoenix HV-85 is right at home in all quarter and giant scale fixed wing aircraft, and large helicopters alike. Our factory pilot Dan Landis has one as his secret weapon for this season's FAI pattern competition, including the Nats in Muncie. Compare the price, size, and capability of the Phoenix HV-85 to the competition, and you'll understand the Castle Creations advantage. Top competition F3A, giant scale aerobatics, and large helicopters - The Phoenix HV-85 does it all, and keeps it's cool while flowing the power!

See the Phoenix User Guide (364k PDF) for more details.

For heli use, check out the Recommended ESCs for Heli Setups page.

All Phoenix HV speed controls feature:
  • Safe "Power On"
  • Microprocessor Controlled
  • Tough surface mount construction
  • Audible Arming Signal
  • Auto Motor cut-off with reset
  • Low torque "Soft Start": protects gear boxes and belt drives from shock
  • Smooth reverse exponential throttle
  • Self-calibrating endpoints: maximizes usable stick travel
  • Auto shut-down when signal is lost
  • Simple setup: no complicated switches or wiring

Specs
Part # 010-0038-00
Price DISCONTINUED
Max Input Voltage 50 volts
Max Amp Draw 85 amps
BEC None
Throttle RF Shielding Opto isolated throttle cable
Resistance 0.0015 ohms
Castle Link Compatible Yes
Length 2.8" (71.12mm)
Width 1.55" (39.37mm)
Height 1.0" (25.4mm)
Weight 4.2 oz. (119g)

Phoenix HV-110 Brushless Motor Control

Can you handle this much power? Has there ever been a controller this much ahead of it's time, and waiting for motor and battery technology to catch up to it? Make sure you're sitting down first before comparing the price to the nearest competing product with similar capabilities. And inexpensive in this case, most certainly does not mean anything was sacrificed in design and component quality. Castle Creations leads the industry in reliable design and also sets the standard for customer service and support. We know everything in your large aircraft rides on having smooth power you don't even have to think about, so when it comes time to step up in electric capability, rely on Castle Creations for quality first designed speed controllers, and the money you've saved makes you simply smarter.

See the Phoenix User Guide (364k PDF) for more details.

For heli use, check out the Recommended ESCs for Heli Setups page.

All Phoenix HV speed controls feature:
  • Safe "Power On"
  • Microprocessor Controlled
  • Tough surface mount construction
  • Audible Arming Signal
  • Auto Motor cut-off with reset
  • Low torque "Soft Start": protects gear boxes and belt drives from shock
  • Smooth reverse exponential throttle
  • Self-calibrating endpoints: maximizes usable stick travel
  • Auto shut-down when signal is lost
  • Simple setup: no complicated switches or wiring

Specs
Part # 010-0032-00
Price DISCONTINUED
Max Input Voltage 50 volts
Max Amp Draw 110 amps
BEC None
Throttle RF Shielding Opto isolated throttle cable
Resistance 0.001 ohms
Castle Link Compatible Yes
Length 2.8" (71.12mm)
Width 1.55" (39.37mm)
Height 1.25" (31.75mm)
Weight 5.3 oz. (150g)
Phoenix HV-140 Brushless Motor Control

Need even more power than the Phoenix HV-110 provides? Check out the Phoenix HV-140! Castle Creations leads the industry in reliable design and also sets the standard for customer service and support. We know everything in your large aircraft rides on having smooth power you don't even have to think about, so when it comes time to step up in electric capability, rely on Castle Creations for quality first designed speed controllers, and the money you've saved makes you simply smarter.

See the Phoenix User Guide (364k PDF) for more details.

All Phoenix HV speed controls feature:
  • Safe "Power On"
  • Microprocessor Controlled
  • Tough surface mount construction
  • Audible Arming Signal
  • Auto Motor cut-off with reset
  • Low torque "Soft Start": protects gear boxes and belt drives from shock
  • Smooth reverse exponential throttle
  • Self-calibrating endpoints: maximizes usable stick travel
  • Auto shut-down when signal is lost
  • Simple setup: no complicated switches or wiring

Specs
Part # 010-0068-00
Price DISCONTINUED
Max Input Voltage 50 volts
Max Amp Draw 140 amps
BEC None
Throttle RF Shielding Opto isolated throttle cable
Resistance 0.001 ohms
Castle Link Compatible Yes
Length 2.8" (71.12mm)
Width 1.55" (39.37mm)
Height 1.25" (31.75mm)
Weight 5.3 oz. (150g)