Products > Garage Sale


Garage Sale

Some of these are discontinued products. Others are test samples we built for various projects which never went into production. Either way, this is your chance to save big!

Mamba XL2 1:5 Scale Controller ONLY $130.00

We discovered some discontinued Mamba XL2 ESCs as we were preparing to move our warehouse within our current facility. Our oversight is your gain! Only $130! These controllers are brand new but come with no packaging, and no warranty. Hurry, quantities are limited!

Mamba Max Pro with EC3 Connectors ONLY $120.00

This is a true plug n’ play Mamba Max Pro. We’ve added EC3 connectors to the battery side to eliminate any necessary soldering. All that’s left for you to do is have fun! Limited quantities available so order yours NOW!

Mamba Max Pro with Deans Connectors and 6.5mm Castle Connectors ONLY $124.00

For those looking to squeeze every last bit of power out of their motor, we’ve made a few Mamba Max Pro ESCs with shortened motor wires and added 6.5mm bullet connectors for the lowest possible resistance. We’ve also soldered a Deans connector to the battery side so there’s no soldering required. Plug in the motor of your choice and hit the trails!

Sidewinder 8th Combo w/CC 6.5mm Polarized Connector, 6.5mm CC Bullets and Series Harness ONLY $187.00

The Sidewinder 8th features everything you’ll need to toss around buggies, truggies, and monster trucks like a rag doll. Anything weighing in at up to 11 lbs. and running up to 6S LiPo is fair game. Its powerful BEC will laugh at nearly every servo on the market today, and its potted design will tolerate wet conditions without flinching. The ESC is equipped with the state-of-the-art software that Castle is known for and has USB programming capability using the Castle Link USB Adapter (sold separately). So now you can beat muddy trails into submission, carve up sloppy streams and puddles and pound on snow filled parking lots. Better yet, we made a “special” batch of these controllers, and we think this custom power configuration speaks for itself!

The Packgage
This exclusive will come ready to rock with a single, Castle Creations polarized 6.5mm male connector already soldered to the power wire, an EXTRA female/male package of 6.5mm polarized connectors for you to install on your battery pack, and a Castle Series Harness equipped with the Castle Creations 6.5mm connectors and our high current 10-gauge. wire. This allows the owner to run with a single battery or simply plug in the Series Harness to double the voltage AND the fun.

· Sidewinder 8th w/pre-soldered 6.5mm Castle Creations connector

· Fan assembly

· Castle Series Harness w/pre-soldered 6.5mm Castle Creations connectors

Why Castle Connectors?
Polarized connectors have a place in the hearts of many modelers as they make it nearly impossible to destroy their expensive electronics and batteries by plugging them in backwards. Castle Creations’ polarized connectors are the highest rated polarized connector on the market. Not only that, but they’re user friendly too! Castle engineers added ridges to the housing making them easier to grip, they accept up to massive 6 AWG wire, and they are clearly marked them for “Battery” and “ESC” for easy reference. The 6.5mm Castle Creations polarized connectors will handle up to 200 amps of continuous current without breaking a sweat at any voltage level used in R/C applications.

The Sidewinder 8th ESC w/2200kv motor performs amazing in 1:10th scale Monster Trucks with up to 6S LiPo packs – and a HECK of a power up for 1:8th buggies, truggies and onroad as well!

Click here for more information about the Sidewinder 8th and 1515B-2200kv motor combo.

Click here for more information about our Castle Connectors.

SIDEWINDER 8th POWER UP PERFORMERS
Associated RC8.2e / RC8T / SC8
LOSI 8ight-E
TRAXXAS E-Maxx* /E-Revo* / Rustler* / Stampede* / Stampede 4x4** / Slash* / Slash 4x4* / Slash Ultimate*
KYOSHO MP9e
DURANGO DEX408 / DEX408v2 / DEX408T
HPI VE8 / Trophy Buggy/Truggy / Vorza Flux
DURATRAX 835E
ARRMA Kraton / Talion / Typhon
OFNA LX2E / NEXX 8 / Hyper SSe / DM1 / GTP2e
*SPORT USE on E-Maxx/E-Revo on 6S w/stock gearing can use SIDEWINDER 8TH; EXTREME PERFORMANCE (gearing other than stock) you must use MAMBA MONSTER.
E-Maxx, E-Revo, & Summit are trademarks of Traxxas. Rival, MGT, RC8, RC8T, and SC8 are trademarks of Associated Electrics, Inc. 8ight and 8ight-E are trademarks of Losi, An Exclusive Horizon Hobby brand. Hyper SSe, NEXX 8, Hyper SSe, DM1, GTP2e are trademarks of OFNA, Inc. VE8, Trophy Buggy, Vorza, And Trophy Truggy Are Trademarks Of HPI Racing. MP9e Is A Trademarks Of Kyosho. DEX408, DEX408v2, DEX408T Are Trademarks Of Durango. 835E Is A Trademark Of Duratrax. Kraton , Talion And Typhon Are Trademarks Of ARRMA.
Mamba Monster 2 w/Deans Ultra Connectors
Click images for larger view




ONLY $135.15

This Monster is Ready to Rock! Isn’t it about time to put a Monster in your high-powered RC rig? This is an especially monster deal, especially if you’re set up with Dean’s™ Ultra Connectors on your batteries.

Limited Exclusive
These Mamba Monster 2 ESCs come with the power wires soldered directly to the circuit board and feature a series battery harness equipped with Deans™ Ultra Connectors. If this is what you’re set up to run, this is about as close to “plug and play” as you’ll ever experience.

The Castle Creations Mamba Monster 2 is intended for use in a wide range of RC vehicles including on-road touring and off-road buggies, truggies and monster trucks running up to 6S LiPo and tipping the scales at up to 15lbs.

Users can run their vehicles through morning dew, down the muddy trails, across the sloppy snow or just about anywhere else you’d be interested in running a 1/8th scale RC buggy or truck. While the innovative case design allows for a fan change if necessary, users need to remember that the fan is not waterproof and should remove it before they head out into super soggy conditions.

As with our other Monsters, this Mamba Monster 2 offers industry-leading software functions and USB programming capability via Castle Link USB adapter (free with included coupon).

We only have a limited number of these on hand – when they’re gone, they’re gone!

Phoenix 10
Performance ESC
WAS $59.95
NOW $45.00

Berg 7P Horizontal Pin ReceiverWAS $39.00
NOW $31.00
Berg 7P Vertical Pin ReceiverWAS $39.00
NOW $31.00

Berg Receiver Crystals
WERE $7.99 EACH
NOW $4.00 EACH
Available in an assortment of channels


Disclaimer: Cannot combine offer with any other rebates or discounts. No upgrades or exchanges on sale merchandise. 90 day warranty - receipt must accompany return. These items are available in LIMITED quantities. We will do our best to remove items as they sell out. Please note - you will be contacted if your order cannot be filled due to availability.