- My Account
- Technical Support
- Get Castle Link
- Garage Sale
Mamba Monster X Extreme 1:8 Scale Combo with Neu-Castle 1512-2650KV Motor
Product #: 010-0145-02
THE MAMBA MONSTER X ESC WITH 1512-2650 KV BRUSHLESS SENSORLESS MOTOR IS NOW ORDERED UNDER P/N 010-0145-04. CLICK HERE TO BE REDIRECTED!
Putting the X in Extreme!
Mamba Monster X is our latest 1:8 scale and Monster truck controller capable of 2S - 6S LiPo (4s max with included 2650kv motor), with an 8 amp peak BEC - and, it’s waterproof*, so you can run your vehicle through morning dew, across soggy snow, or a muddy trail. This is the perfect upgrade for 1:8 scale buggies and on-road vehicles as well as 1:10 scale monster trucks weighing up 9 lbs. It also comes standard with a highly efficient, 30mm ESC cooling fan. Mamba Monster X also features updated Audible Alerts that will notify you of possible issues with calibrations and error conditions to help diagnose problems in the field.
The Auxiliary Advantage.
Mamba Monster X features the addition of a new, programmable Auxiliary Wire that allows you to make “on-the-go” adjustments to several settings such as torque control, and max throttle, and fine-tune the performance of your ESC right from the transmitter using an auxiliary channel on the receiver. The AUX wire function is disabled by default but is programmable via Castle Link. Once you have programmed the functionality of the AUX wire, that setting can then be adjusted on-the-go from a compatible transmitter.
Sensored Motor Capable (with optional Sensor Harness)
Mamba Monster X can also run sensored brushless motors with the purchase of an optional Sensor Harness. This sensored-motor capability opens up a whole new segment of R/C enthusiasts who will now get to experience a Mamba Monster X-equipped racer, rock racer, or rock crawler.
Mamba Monster X can capture and record performance data from your last couple of runs, commonly referred to as data logging. This data can be downloaded via the Castle Link USB programmer; you can use the Quick Connect Duo (sold separately) to allow you to quickly access the ESC's receiver wire without having to disconnect from your receiver. You can then analyze this data and make adjustments to the ESC to maximize both performance and battery life.
Mamba Monster X is telemetry ready, which means owners of the Futaba T4PX Transmitters will be able to purchase the Castle Creations Telemetry Link for S.BUS2. Real-time data such as ESC temperature, voltages and RPM can be monitored to ensure performance advantages and spare you the “unknown” parameters that all R/C enthusiasts experience at some point. Telemetry data provides another level of protection and can increase performance.
This combo includes the Mamba Monster X controller and the Neu-Castle 1512-2650Kv motor, which features:
- High quality oversized bearings
- Sintered Neodymium magnets
- Superior electromagnetic design
- Rigorous quality control
*Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.
- Waterproof : Yes
- Telemetry Capable : Yes
- Data Logging : Yes
- Auxiliary Wire : Yes
- Minimum Input Voltage : 2S
- Maximum Input Voltage : 4S
- Sensored Capable : Yes
Castle Link Compatible
With the Castle Link USB Programming Kit you can use your Windows™ PC to easily program your controller. Adjustable settings include:
- Throttle curve
- Braking curve
- Drag brake
- Auto LiPo cutoff
- Punch Control
- Reverse Type
- Motor Type
Additional Castle Link benefits include:
- Access to all firmware updates, including added features sets released from Castle Engineering, at no charge.
- Intuitive Demo Mode capability
- Download and view data logs using the built-in Graph Viewer
- Ability to save setup profiles for later use
|Input Voltage Range:||MIN: 2S LiPo
MAX: 6S LiPo (25.2V) (4s max with 2650kv motor)
|BEC Specifications:||Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V|
|Operating Environment:||Waterproof* design allows for use in nearly any environment.|
|Reversible:||Yes, but may be for racing.|
|Cooling Fan:||Yes, factory equipped (30mm), fully removable* (see Product Use Statements below)|
|Size:||Length: 2.09" (53mm)
Width: 1.93" (49mm)
Height: 1.44" (36.4mm)
|Weight (with no battery connectors):||3.92 oz. (111.g)|
|Connectors:||6.5mm female bullets for motor connection.|
|Items Needed for Operation:||Battery Connector required, 6.5mm Castle Connectors are recommended.|
|Product Use Statements:||*Although Mamba Monster X and Castle brushless motors are waterproof, they are not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.|
|Application Guidelines:||Intended for up to 4S (14.8 volts) operation in vehicles weighing less than 9 lbs, with batteries, ready-to-run.|
|Recommended Motors:||Combo includes Neu-Castle 1512 2650Kv: Max Cells: 4S Lipo or 12 NiMH
|Max. Recommended Vehicle Weight:|| Less than 15 lbs, with batteries, ready-to-run. (9lbs with included 2650kv motor)
|Programmability:||Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Link included) and freely downloadable Castle Link Windows software.|
|Telemetry Link Capable:||Yes|
|Input Voltage Range:||MIN: 2S LiPo; MAX: 4S LiPo (see Application Guidelines below)|
|Motor Size:||Length: 2.68" (68mm)
Diameter: 1.57" (39.98mm)
|Shaft Size:||Diameter: 5mm, Length: 20mm
|Weight (w/wires):||13.1 oz. (370g)|
|Mounting Hole Specifications:||3mm screw holes @ 1" (25.4mm) spacing.|
|Cooling Fan:||Available, but not included|
|Connectors:||6.5mm male bullets.
|Items Needed for Operation:||N/A|
|Product Use Statements:||N/A|
|Application Guidelines:||The ESC and motor are Intended for 4S (16.8 Volt) operation in Buggy and On road vehicles weighing 9lbs or less with batteries, ready-to-run.|
|Max. Recommended Vehicle Weight:||9 lbs (with batteries, ready to run)|
|Tech Notes:||Monitor motor temperatures closely; overheating a motor will cause
permanent damage to the magnets. Never exceed 180° F on the the motor or
|Monster X Driver's Ed Guide||Monster X Quick Start Guide|
Castle Creations, Inc. warrants this product to be free from manufacturing defects for a period of one year from date of purchase.
This is a high power product with the potential to be very dangerous. Please read the safety information before use. This product may contain chemicals known to the State of California to cause cancer and or birth defects or other reproductive harm.
U.S. Patent # 7400103, 7492122, 7579796, 7740516, 8287328, 8678875, and 8905814 B2 - Other patents pending.
Controller designed, and circuit boards manufactured, in Olathe, Kansas USA.
Controller assembled in Mexico.