Cart (0 Product )

My Cart - Quick Order

Mamba Monster 2 Extreme 1:8 Scale Combo with Neu-Castle 1515-2200Kv Motor
Press and move to zoom
Mouse over image to zoom

Mamba Monster 2 Extreme 1:8 Scale Combo with Neu-Castle 1515-2200Kv Motor

Product #: 010-0108-01

UPC code:819326010378

Mamba Monster 2 is capable of 2S LiPo to a maximum of 6S LiPo. It's also waterproof*, so you can run your vehicle across the morning dew, through soggy snow, or just about anywhere else you’d be interested in running a 1:8 scale RC buggy or truck. It features an easy-access case allowing you to replace fans quickly, if necessary. Additionally, Mamba Monster 2 features solder posts, so changing battery wire length and direction is simple for an even more custom install.

Award Winning Combination
This combo includes the Mamba Monster 2 controller and the Neu-Castle 1515-2200Kv motor, which features:

  • High quality oversized bearings
  • Sintered neodymium magnets
  • Superior electromagnetic design
  • Rigorous quality control

The Neu-Castle 1515-2200Kv motor has won First Place in RC Driver's "Voice Your Choice" awards in 2009, 2010, 2013, and 2014 and RC Car Action "Reader's Choice Award" in 2013, 2014, 2015 and 2016!

*Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.

(Based on 48 vote(s))
1 review(s) | Write a review
USD $185.00 /EA
List Price: USD $279.00 /EA
Bookmark and Share
  • Waterproof : Yes
  • Telemetry Capable : No
  • Data Logging : No
  • Auxiliary Wire : No
  • Minimum Input Voltage : 2S
  • Maximum Input Voltage : 6S
  • Sensored Capable : No
  • Recon G6 Certified ESC : No
  • ROAR Certified ESC : No
  • Availability: Not available

Castle Link Compatible
With the Castle Link USB Programming kit you can use your Windows™ PC to easily program your controller. Adjustable settings include:

  • Throttle
  • Braking Curve
  • Drag Brake
  • Auto LiPo cutoff
  • Punch Control
  • Reverse Type
  • Motor Type

Additional Castle Link benefits include:

  • Access to all firmware updates, including added features sets released from Castle Engineering, at no charge.
  • Intuitive Demo Mode capability
  • Ability to save setup profiles for later use
Technical Specs
Input Voltage Range: MIN: 2S LiPo
MAX: 6S LiPo
BEC Specifications: User selectable output between 5 and 7 volts; default 5.5 volts
Operating Environment: Waterproof* design allows for use in nearly any environment.
Brake: Proportional
Reversible: Yes, but may be disabled for racing.
On/Off Switch: Yes
Cooling Fan: Yes, factory equipped, fully removable** (see Product Use Statements below)
Size: Length: 2.19" (56mm)
Width: 1.86" (47mm)
Height: 1.33" (34mm)
Weight (with no battery connector): 3.93 oz. (111.5g)
Connectors: 6.5mm female bullets for motor connection.
Items Needed for Operation: Battery Connector required - 6.5mm Castle Connectors are recommended.
Product Use Statements: *Although Monster 2 and Castle brushless motors are waterproof, they are not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.

**The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.
Application Guidelines: Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 15 lbs, with batteries, ready-to-run.
Recommended Motors: Combo includes Neu-Castle 1515 2200Kv: Max Cells: 6 Lipo or 16 NiMH
Max. Recommended Vehicle Weight: Less than 15 lbs, with batteries, ready-to-run
Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Link included) and freely downloadable Castle Link Windows software.
Telemetry Link Capable: No
Tech Notes: Not all LiPos are created equal, and surge ratings should never be used to determine a pack’s suitability for a brushless application. Use the CONTINUOUS C rating only. Mamba Monster setups frequently hit 100+ amps in peaks. We strongly suggest using 5,000 mAh or larger LiPo cells with a discharge rating of at least 30C (or high quality 25C batteries such as Traxxas® Power Cells®). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups.
Input Voltage Range: MIN: 2S LiPo; MAX: 6S LiPo (see Application Guidelines below)
Kv: 2200
Max. RPM: 60,000
Motor Size: Length: 2.96" (75.18mm)
Diameter: 1.57" (39.98mm)
Shaft Size: Diameter: 5mm, Length: 20mm
Weight (w/wires): 15 oz. (452.2g)
Mounting Hole Specifications: 3mm screw holes @ 1" (25.4mm) spacing.
Cooling Fan: Available, but not included.
Connectors: 6.5mm male bullets.
Items Needed for Operation: N/A
Product Use Statements: N/A
Application Guidelines: The ESC and motor are intended for up to 6S (25.2 Volt) operation. Incredible in monster trucks with up to 6S LiPo packs (4S LiPo is the sweet spot), and works great in 1:8 buggies and truggies and on road as well. (vehicle weight limit is 15 lbs or less, with batteries ready-to-run).
Max. Recommended Vehicle Weight: 15 lbs (with batteries, ready to run)
Tech Notes: Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC.
Monster 2 Driver's Ed Guide Monster 2 Quick Start Guide

Castle Creations, Inc. warrants this product to be free from manufacturing defects for a period of one year from date of purchase.

This is a high power product with the potential to be very dangerous. Please read the safety information before use. This product may contain chemicals known to the State of California to cause cancer and or birth defects or other reproductive harm.

U.S. Patent # 7400103, 7492122, 7579796, 7740516, 8287328, 8678875, and 8905814 B2 - Other patents pending.

Controller designed, and circuit boards manufactured, in Olathe, Kansas USA.
Controller assembled in Mexico.

Motor designed in Olathe, Kansas USA.
Motor made in China.

Average rating:
(Based on 48 vote(s))
Rate this product:
Spiffy From Lancaster, Ohio
Fantastic power system for Yeti XL
April 16, 2017
Picked up this combo for a Axial Yeti XL kit and it is simply amazing. Plenty of power, still only running 4S and seems plenty of speed. The logging is fantastic and helped me find decent batteries using ripple voltage logging.
0 of 0 people found this review helpful
Was this review helpful to you? (0) (0)

Recently Viewed

  • USD $153.38 /EA
  • List Price USD $189.95 /EA
  • USD $96.86 /EA
  • List Price USD $119.95 /EA
Mamba XL X Extreme 1:5 Scale ESC
  • USD $193.76 /EA
  • List Price USD $239.95 /EA
  • USD $209.91 /EA
  • List Price USD $259.95 /EA
Polarized Castle Connectors - 4.0mm Female Multi-Pack
  • USD $8.68 /EA
  • List Price USD $10.75 /EA
You may also be interested in
CC Blower Fan Shroud for 15XX Motors
  • USD $10.09 /EA
  • List Price USD $12.99 /EA
  • Qty
Quick Connect Duo
  • USD $15.30 /EA
  • List Price USD $18.95 /EA
  • Qty
Polarized Castle Connectors - 6.5mm Female Multi-Pack
  • USD $9.49 /EA
  • List Price USD $11.75 /EA
  • Qty
ESC Cooling Fan - Mamba Monster 2
  • USD $10.49 /EA
  • List Price USD $12.99 /EA
  • Qty
Castle Series Wire Harness - Deans Ultra
  • USD $10.49 /EA
  • List Price USD $12.99 /EA
  • Qty