Welcome to our new site! If you find errors or want to leave feedback, please submit them here.Thank you!

Cart (0 Product )

My Cart - Quick Order

Mamba Max Pro Extreme 1:10 Scale Combo with Neu-Castle 1406-6900Kv Motor
Press and move to zoom
Mouse over image to zoom

Mamba Max Pro Extreme 1:10 Scale Combo with Neu-Castle 1406-6900Kv Motor

Product #: 010-0066-08

UPC code:855773002566

THIS MODEL HAS BEEN DISCONTINUED, THIS PAGE IS FOR INFORMATIONAL PURPOSES ONLY.  CHECK OUT THE MAMBA X ESC AND SENSORED MOTOR COMBOS HERE!


Mamba Max Pro is our extreme 1:10 brushless ESC capable of operating at up to 6S, with a 3.5A Peak BEC, and featuring SMARTSENSE™ operation. SmartSense uses the motor sensors to start the motor and then it switches over to Castle’s ultra powerful and efficient dynamic sensorless mode which boosts motor efficiency, so your motor produces more power and less heat. Sensored Only mode runs sensored motors using sensored timing only.

C.H.E.A.T. Mode (Castle High Energy Advanced Timing)
This mode allows users to electronically advance their sensored motor’s timing to extreme settings. This can often yield that extra bit of power needed to win the race. But remember, extra power equals extra motor heat.

The difference between Sensored and Sensorless
Castle’s Sensorless controllers offer best in class start up and braking which are fine for most users. Sensored-only motor operation cannot deliver maximum efficiency. Sensors are terribly inaccurate for motor timing purposes as the motor’s magnetic fields change under load or at speed; that’s where Sensorless operation shines. Sensorless is also just more dependable. There are fewer wires and connections that need to survive the incredibly rough treatment most RC vehicles endure. The racing world’s rules require Sensored motors, and they can offer slightly better start up and braking performance. Mamba Max Pro offers the ultimate in flexibility: use it with all your 1:10 motors - sensored or sensorless.

Mamba Max Pro is approved for R.O.A.R. racing with firmware version 1.26.

This combo includes a Mamba Max Pro ESC and Neu-Castle 1406-6900Kv motor.

Bookmark and Share
  • Waterproof : No
  • Telemetry Capable : No
  • Data Logging : No
  • Auxiliary Wire : No
  • Minimum Input Voltage : 2S
  • Maximum Input Voltage : 6S
  • Sensored Capable : Yes

Castle Link Compatible
With the Castle Link USB Programming kit you can use your Windows™ PC to easily program your controller. Adjustable settings include:

  • Throttle
  • Braking curve
  • Drag brake
  • Auto LiPo cutoff
  • Punch Control
  • Reverse Type
  • Motor Type

Additional Castle Link benefits include:

  • Access to all firmware updates, including added features sets released from Castle Engineering, at no charge.
  • Intuitive Demo Mode capability
  • Ability to save setup profiles for later use
Intended for up to 2S (7.4 Volt) operation in vehicles weighing less than 5 lbs, with batteries, ready-to-run.
Technical Specs
Controller
Input Voltage Range: MIN: 2S LiPo
MAX: 6S LiPo (25.2V)
(Maximum 2s with included 1406 - 6900kv motor)
BEC Specifications: 3.5A Peak BEC
Operating Environment: N/A
Brake: Proportional with adjustable curve
Reversible: Yes, but may be disabled for racing
On/Off Switch: Yes
Cooling Fan: Yes, included
ESC Size: L: 1.84" (46.85mm)
W: 1.46" (37.2mm)
H: 1.25" (31.96mm)
ESC Weight (w/wires): 2.8 oz. (81g)
Connectors: 4mm male bullets
Items Needed for Operation: Battery Connector required; Castle 4mm polarized connectors, Dean's Ultra Plug, or Traxxas Power Connector recommended.
Product Use Statements: Not intended for use in wet conditions, ESC is not waterproof
Application Guidelines: 1/10th scale on-road cars for 2s use.
Lighter off-road 1/10th stadium trucks and buggies with conservative gearing.
NOT for use in 2WD or 4WD short course trucks.
Please refer to our Gearing Chart for recommended motor, battery and gearing for some of the more popular vehicles on the market.
Recommended Motors: Combo includes Neu-Castle 1406 6900Kv: Max Cells: 2S Lipo or 8 NiMH
Max. Recommended Vehicle Weight: 4lbs
Programmability: Fully programmable Castle feature set using Castle Link USB adapter (sold separately) and freely downloadable Castle Link Windows software.
Telemetry Link Capable: No
Tech Notes: N/A
Motor
Input Voltage Range: 2S LiPo, 6-8 cell NiMH
Kv: 6900
Max. RPM: 100,000
Motor Size: L: 1.9" (50mm)
Diameter: 1.4" (36mm)
Shaft Size: Diameter: 3.2mm (1/8"), Length: 15mm (0.59")
Weight (w/wires): 5.9 oz. (169.5g)
Mounting Hole Specifications: 3mm screw holes @ 1" (25.4mm) spacing.
Cooling Fan: Available, but not included
Connectors: 4mm male bullets
Items Needed for Operation: N/A
Product Use Statements: N/A
Application Guidelines: 1/10th scale on-road cars for 2s use.
Lighter off-road 1/10th stadium trucks and buggies with conservative gearing.
NOT for use in 2WD or 4WD short course trucks.
Please refer to our Gearing Chart for recommended motor, battery and gearing for some of the more popular vehicles on the market.

Max. Recommended Vehicle Weight: 4lbs
Tech Notes: N/A
Resources
Driver's Ed Guide Mamba Max Pro Quick Start Guide 1/10th scale gearing chart

Castle Creations, Inc. warrants this product to be free from manufacturing defects for a period of one year from date of purchase.

This is a high power product with the potential to be very dangerous. Please read the safety information before use. This product may contain chemicals known to the State of California to cause cancer and or birth defects or other reproductive harm.

U.S. Patent # 7400103, 7492122, 7579796, 7740516, 8287328, 8678875, and 8905814 B2 - Other patents pending.

Controller designed, and circuit boards manufactured, in Olathe, Kansas USA.
Controller assembled in Mexico.

Motor designed in Olathe, Kansas USA.
Motor made in China.

Average rating:
Rate this product:

Recently Viewed

Phoenix Edge HVF 160 Amp ESC, 12S / 50.4V, No BEC w / Cooling Fan
  • USD $274.51 /EA
  • List Price USD $339.95 /EA
PHOENIX EDGE LITE 200 AMP ESC, 8S / 33.6V WITH 5 AMP BEC
  • USD $281.82 /EA
  • List Price USD $349.00 /EA
Phoenix Edge HV 40 AMP ESC, 12S / 50.4V, no BEC
  • USD $104.93 /EA
  • List Price USD $129.95 /EA
MAMBA X, 25.2V WP ESC, 8A PEAK BEC, DATALOGGING
  • USD $146.12 /EA
  • List Price USD $180.95 /EA
You may also be interested in
Replacement Case for Mamba Max Pro ESC
  • USD $10.49 /EA
  • List Price USD $12.99 /EA
  • Qty
CC Blower Fan Shroud for 36mm Motors
  • USD $10.49 /EA
  • List Price USD $12.99 /EA
  • Qty
Polarized Castle Connectors - 4.0mm Male Multi-Pack
  • USD $8.68 /EA
  • List Price USD $10.75 /EA
  • Qty
Quick Connect
  • USD $12.07 /EA
  • List Price USD $14.95 /EA
  • Qty