- My Account
- Technical Support
- Get Castle Link
- Garage Sale
Mamba Max Pro SCT Extreme 1:10 Scale Combo with Neu-Castle 1415-2400Kv Motor
Product #: 010-0091-00
For the Love of Pure Speed!
Mamba Max Pro is our extreme 1:10 brushless ESC capable of operating at up to 6S, with a 3.5A Peak BEC, and featuring SMARTSENSE™ operation. SmartSense uses the motor sensors to start the motor and then it switches over to Castle’s ultra powerful and efficient dynamic sensorless mode which boosts motor efficiency, so your motor produces more power and less heat. Sensored Only mode runs sensored motors using sensored timing only.
C.H.E.A.T. MODE (Castle High Energy Advanced Timing)
This modeallows users to electronically advance their sensored motor’s timing to extreme settings. This can often yield that extra bit of power needed to win the race. But remember, extra power equals extra motor heat.
The difference between Sensored and Sensorless
Castle’s Sensorless controllers offer best in class start up and braking which are fine for most users. Sensored-only motor operation cannot deliver maximum efficiency. Sensors are terribly inaccurate for motor timing purposes as the motor’s magnetic fields change under load or at speed; that’s where Sensorless operation shines. Sensorless is also just more dependable. There are fewer wires and connections that need to survive the incredibly rough treatment most RC vehicles endure. The racing world’s rules require Sensored motors, and they can offer slightly better start up and braking performance. Mamba Max Pro offers the ultimate in flexibility: use it with all your 1:10 motors - sensored or sensorless.
Mamba Max Pro is approved for R.O.A.R. racing with firmware version 1.26.
This combo was specifically created for SCT applications and includes a Mamba Max Pro SCT ESC and Neu-Castle 1415-2400Kv motor.
- Waterproof : No
- Telemetry Capable : No
- Data Logging : No
- Auxiliary Wire : No
- Minimum Input Voltage : 2S
- Maximum Input Voltage : 6S
- Sensored Capable : Yes
Castle Link Compatible
With the Castle Link USB Programming kit you can use your Windows™ PC to easily program your controller. Adjustable settings include:
- Braking curve
- Drag brake
- Auto LiPo cutoff
- Punch Control
- Reverse Type
- Motor Type
Additional Castle Link benefits include:
- Access to all firmware updates, including added features sets released from Castle Engineering, at no charge.
- Intuitive Demo Mode capability
- Ability to save setup profiles for later use
|Input Voltage Range:||MIN: 2S LiPo
MAX: 6S LiPo (25.2V)
(4s maximum with included 1415 -2400kv motor)
|BEC Specifications:||3.5A Peak BEC|
|Brake:||Proportional with adjustable curve|
|Reversible:||Yes, but may be disabled for racing
|Cooling Fan:||Yes, included|
|ESC Size:||L: 1.84" (46.85mm)
W: 1.46" (37.2mm)
H: 1.25" (31.96mm)
|ESC Weight (w/wires):||2.8 oz. (81g)|
|Items Needed for Operation:||Battery Connector required; Castle 4mm polarized connectors, Dean's Ultra Plug, or Traxxas Power Connector recommended.
|Product Use Statements:||Not intended for use in wet conditions, ESC is not waterproof
|Application Guidelines:||Intended for up to 4S (14.8 Volt) operation in vehicles weighing less than 6.5lbs, with batteries, ready-to-run.
|Recommended Motors:||Combo includes Neu-Castle 1415 2400Kv: Max Cells: 4S Lipo or 14 NiMH
|Max. Recommended Vehicle Weight:||6.5lbs.|
|Programmability:||Fully programmable Castle feature set using Castle Link USB adapter (sold separately) and freely downloadable Castle Link Windows software.|
|Telemetry Link Capable:||No|
|Input Voltage Range:||3-4S LiPo|
|Motor Size:||L: 2.7" (69.5mm)
Diameter: 1.4" (36mm)
|Shaft Size:||Diameter: 3.2mm, Length: 15.5mm|
|Weight (w/wires):||10.6 oz. (301.5g)|
|Mounting Hole Specifications:||3mm screw holes @ 1" (25.4mm) spacing.
|Cooling Fan:||Yes, included|
|Items Needed for Operation:||N/A|
|Product Use Statements:||N/A|
|Application Guidelines:||This system is designed for 3S to 4S, 5,000+ mah, 25c or better LiPo. 3S is the recommended set up, 4S is extreme.|
|Max. Recommended Vehicle Weight:||6.5lbs|
|Tech Notes:||Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC.|
|Driver's Ed Guide||Mamba Max Pro Quick Start Guide||1/10th scale gearing chart
Castle Creations, Inc. warrants this product to be free from manufacturing defects for a period of one year from date of purchase.
This is a high power product with the potential to be very dangerous. Please read the safety information before use. This product may contain chemicals known to the State of California to cause cancer and or birth defects or other reproductive harm.
U.S. Patent # 7400103, 7492122, 7579796, 7740516, 8287328, 8678875, and 8905814 B2 - Other patents pending.
Controller designed, and circuit boards manufactured, in Olathe, Kansas USA.
Controller assembled in Mexico.
Motor designed in Olathe, Kansas USA.
Motor made in China.